Key Features:

Signal conditioning for eddy current probes and velocity sensors

Galvanic isolation between channels (250VAC)

Wide frequency response (DC to 15kHz)

DIN rail or panel mounting options

IP65-rated enclosure for harsh environments

Technical Highlights:

Screw terminal connections for secure wiring

Built-in noise filtering for signal integrity

Supports cable runs up to 500 meters

Wide operating temperature range (-40°C to +85°C)

Typical Applications:

Integration with EPRO 9000 series monitors

Turbine and compressor monitoring systems

Industrial machinery protection installations

Vibration measurement signal conditioning

Compliance:

Meets IEC 61000 EMC standards

RoHS compliant

Optional ATEX/IECEx versions available

Key Features:

Dual-channel design for simultaneous monitoring of two measurement points

Supports multiple sensor types (eddy current probes, velocity sensors, and accelerometers)

Wide measurement range (0-500µm vibration, 0-50mm/s velocity)

Advanced signal processing with 10kHz sampling rate

Configurable alarm setpoints with delay timers

Multiple output options (4-20mA, ±10V, RS-485/Modbus)

Technical Specifications:

Compliant with API 670 and ISO 7919 standards

IP66/IP67 rated enclosure for harsh environments

Wide operating temperature range (-30°C to +70°C)

24VDC or 100-240VAC power supply options

ATEX/IECEx certified versions available

Typical Applications:

Turbines and compressors in power generation

Critical pumps and motors in oil & gas

Rotating machinery in chemical plants

Predictive maintenance systems

Benefits:

Enhanced machinery protection

Reduced downtime through early fault detection

Flexible integration with control systems

Reliable operation in extreme conditions

Key Features:

Reliable shaft vibration and position monitoring (0.5-2.5mm range)

8mm diameter probe with stainless steel construction

Wide frequency response (0-10kHz) for dynamic measurements

High temperature operation (up to +150°C probe rating)

ATEX/IECEx certified versions available for hazardous areas

Technical Highlights:

Standard sensitivity: 8mV/μm

-24VDC power supply operation

IP67 protection rating

Military-grade connectors for secure connections

Typical Applications:

Gas/steam turbine monitoring

Compressor protection systems

Bearing condition monitoring

Rotor position measurement

This system meets API 670 and ISO 7919 standards, making it suitable for critical machinery protection in power generation, oil & gas, and other heavy industries. The PR 6426/010-100 offers excellent reliability and accuracy for predictive maintenance programs.

Key Features:

Dual-function monitoring: Simultaneously measures shaft vibration (0-500 µm) and axial position (±1mm to ±5mm)

Advanced sensor compatibility: Works with industry-standard 8mm/11mm eddy current probes

Flexible outputs: Offers 4-20mA, ±10V analog signals and Modbus RTU communication

Multi-level protection: Configurable Warning/Danger alarms with relay outputs

Wide operating range: Functions in extreme temperatures (-30°C to +70°C) with IP66/IP67 protection

Typical Applications:

Continuous monitoring of turbines, compressors and large rotating equipment

Machinery protection in power generation and oil & gas industries

Predictive maintenance programs for critical assets

Key Features:
✔ Multi-Sensor Support – Works with eddy current probes, velocity sensors, and accelerometers
✔ Dual-Channel Input – Monitors two independent measurement points simultaneously
✔ Programmable Alarms – Configurable Warning/Danger thresholds with relay outputs
✔ Flexible Outputs – 4–20 mA, ±10 V, RS-485 (Modbus), and optional PROFIBUS
✔ Wide Frequency Range – Covers 0.1 Hz – 10 kHz (displacement) and 1 Hz – 1 kHz (velocity/acceleration)
✔ Industrial Durability – IP65-rated enclosure, operates in -20°C to +70°C

Typical Applications:
Turbines, compressors, pumps, and motors

Condition monitoring & predictive maintenance

Integration with PLC/DCS systems

The EZ1000 enhances operational safety and reduces downtime by providing real-time vibration analysis and alarm-based protection.

Key Features:
Dual-channel input for simultaneous monitoring of two axes.

Wide frequency range (0.5 Hz – 10 kHz) for diverse applications.

Configurable alarms (Warning/Danger) with relay outputs for machine protection.

Analog (4–20 mA / ±10 V) and digital (RS-485/Modbus) outputs for integration with control systems.

Robust design with IP65 protection, suitable for harsh industrial environments.

Typical Applications:
Turbines, compressors, pumps, and motors.

Predictive maintenance and condition monitoring.

The EZ1900-070 ensures reliable vibration analysis and machine safety, helping prevent unplanned downtime. For detailed specifications, refer to the official EPRO documentation.

Core Function:
Compact signal conditioning module for converting eddy current probe signals to standardized 4-20mA output.

Key Specifications:
• Input: -2 to -20V DC (from EPRO PR642x probes)
• Output: Isolated 4-20mA (linear to displacement)
• Accuracy: ±0.5% FS
• Load Capacity: 0-500Ω

Electrical Characteristics:
✓ 24V DC power supply (±10%)
✓ <5W power consumption
✓ 100kΩ input impedance

Environmental Ratings:

Operating Temp: -20°C to +70°C

Humidity: 5-95% RH (non-condensing)

Protection: IP20

Configuration & Indicators:
• DIP switch adjustable range
• LED status indicators (power/signal)
• DIN-rail mounting

Compatibility:

Works with EPRO MMS6000/A6500 systems

Supports PR6423/PR6426 probe series

Typical Applications:

Turbine vibration monitoring

Compressor displacement systems

PLC/DCS integration

Installation Note:
Requires shielded cabling for noise protection

Core Function:
Extended-range eddy current sensor for large-displacement monitoring in industrial applications.

Key Specifications:
• Sensitivity: 1.1 mV/µm (±5%)
• Wide Measurement Range: 0-10mm (10,000µm)
• Frequency Response: DC to 10kHz
• Output: -2 to -20V DC

Robust Design:
✓ 8mm probe diameter
✓ M10×1 threaded mounting
✓ -40°C to +150°C operation
✓ 4MPa pressure rating

Measurement Performance:

Default calibration for AISI 4140 steel

Linear range: 3-7mm (60% of full scale)

Typical accuracy: ±1% FS

System Integration:
• Compatible with EPRO MMS6000 systems
• Requires signal conditioning for optimal performance
• 5m high-temp cable (standard)

Typical Applications:

Large turbine shaft monitoring

Industrial compressor position measurement

Heavy machinery displacement monitoring

Special Notes:

/002 variant features enhanced environmental tolerance

Lower sensitivity (1.1mV/µm) optimized for wide-range measurement

Requires proper signal amplification for small displacement resolution

Compliance:
Meets API 670 machinery protection standards

Core Function:
High-sensitivity eddy current displacement sensor for precision machinery monitoring in critical applications.

Key Specifications:
• Sensitivity: 10.0 mV/µm (±5%)
• Measurement Range: 0-1.0mm (1000µm)
• Frequency Response: DC to 10kHz
• Output: -2 to -20V DC linear signal

Robust Design:
✓ 11mm heavy-duty probe
✓ M14×1.5 threaded mounting
✓ -40°C to +120°C operation
✓ 20g vibration resistance
✓ 4MPa pressure rating

Measurement Performance:

Default calibration for AISI 4140 steel

Linear range: 60% of full scale

Accuracy: ±1% FS

System Integration:
• Compatible with EPRO MMS6000 systems
• Standard 5m/9m cable options
• CON021 quick-disconnect available

Typical Applications:

Turbine shaft vibration monitoring

Compressor thrust bearing measurement

Precision machinery protection

Special Features:

/202 variant optimized for high-sensitivity applications

Enhanced signal resolution for critical measurements

Industrial-grade durability

Compliance:
Meets API 670 machinery protection standards

Core Function:
Industrial-grade eddy current sensor for precision displacement monitoring in harsh operating environments.

Key Specifications:
• Sensitivity: 4.1 mV/µm (±5%)
• Measurement Range: 0-2.0mm (2000µm)
• Frequency Response: DC to 10kHz
• Extended Temp Range: -40°C to +150°C

Robust Construction:
✓ 8mm probe diameter with M10×1 threading
✓ Enhanced vibration resistance (25g)
✓ 4MPa pressure rating
✓ High-temperature cable option

Measurement Performance:

Default calibration for AISI 4140 steel

Linear operating range: 60% of full scale

±1% FS typical accuracy

System Integration:
• Compatible with EPRO MMS6000 systems
• 5m mineral-insulated cable (standard)
• ATEX versions available

Typical Applications:

Steam turbine shaft monitoring

Offshore compressor protection

High-vibration industrial equipment

Special Features:

/002 variant designed for extreme environments

Optimized for reliable performance under:

High temperatures

Severe vibration

Pressure fluctuations

Compliance:
Meets API 670 machinery protection standards