Products
Products
ABB Allen-Bradley ADEPT ALSTOM
All Categories
AMAT B&R BACHMANN BENTLY Bosch Rexroth BAILEY CUTLER-HAMMER DEIF DANAHER Enterasys Extreme EATON ELAU EMERSON EPRO FANUC servo motor FOXBORO GE HIMA Honeywell ICSTriplex IFM Kollmorgen SIEMENS Schneider WOODWARD YASKAWA Omron YOKOGAWA MOOG MOTOROLA NI RELIANCE Rexroth SEW-EURODRIVE TRICONEX Weidmueller Mitsubishi SICK FISHER
home
eaton
P5-160-V/SVB
Technical Parameters Parameter Category Specification / Value Brand Eaton Product Series P5 Product Model P5-160-V/SVB Product Type Switched-Mode Power Supply (SMPS) with Static Voltage Buffer Output Power 160 W Output Voltage 24 V DC Rated Output Current 6.7 A Input Voltage Range 85...264 V AC (wide range) / 120...370 V DC Input Frequency 47...63 Hz Key Feature Static Voltage Buffer (SVB) - Holdup time typically ≥ 20 ms after mains failure Efficiency High efficiency (typically > 93%) Mounting DIN Rail Mounting (35 mm) Connection Removable screw terminal block Operating Temperature -25 °C ... +70 °C (with derating) Approvals / Certifications CE, cULus, ATEX (for specific hazardous area applications)

More details >> Request a Quote >>
eaton
DILM32-XTEE11
Technical Parameters Parameter Category Specification / Value Brand Eaton Product Series DILM Product Model DILM32-XTEE11 Product Type Contactor Relay (4-pole, changeover contacts) with Latching Function Number of Main Contacts 4 Contact Type 4 Changeover (CO) / Form C (Each contact: 1 NO + 1 NC) Rated Operational Current (Ith) 10 A (e.g., at 230V AC) Rated Insulation Voltage (Ui) 690 V AC Control Coil Voltage 24 V DC Special Feature Latching (Impulse) Version (Mechanically held) Electrical Life > 1 x 10⁶ operations Mechanical Life > 10 x 10⁶ operations Mounting 35 mm DIN Rail Terminal Type Cage Clamp (Spring-loaded) Auxiliary Contacts Integrated (as part of the "11" configuration) Approvals / Certifications CE, cULus, CCC, IEC/EN 60947-5-1

More details >> Request a Quote >>
eaton
IZM-UVR-TD-230AC
Technical Parameters Parameter Category Specification / Value Brand Eaton Product Series IZM Product Model IZM-UVR-TD-230AC Product Type Undervoltage Release (UVR) with Time Delay Compatibility Designed for IZM Series Air Circuit Breakers Rated Control Supply Voltage (Us) 230 V AC Trip Delay on Power Loss Time-Delayed (Specific delay time, e.g., 0.5s to 3s, to be confirmed with datasheet) Function Trips the circuit breaker when the supply voltage drops below a preset level and remains there for longer than the time delay. The breaker cannot be reclosed until the supply voltage is restored to a sufficient level. Mounting Typically installed inside the ACB compartment Connection Screw terminals for control wiring

More details >> Request a Quote >>
eaton
C441Q 3-2398-002D
Technical Parameters Parameter Category Specification / Value Brand Eaton Product Series / Type C441Q Contactor Catalog Number 3-2398-002D Product Type Electromechanical Contactor Number of Main Poles 4 Rated Operational Current (Ith) 32 A (at 400V AC, for AC-1 duty) Rated Operational Voltage (Ue) Up to 690 V AC Motor Rating (AC-3) at 400V 15 kW / 20 HP Control Coil Voltage 230 V AC, 50/60 Hz Electrical Life > 1 Million operations (under specific load conditions) Mechanical Life > 10 Million operations Auxiliary Contacts Not included as standard; add-on blocks available Mounting Snap-on mounting to standard DIN Rail (35mm) or screw mounting Connection Screw terminals Approvals / Certifications CE, cULus, CCC, IEC/EN 60947-4-1

More details >> Request a Quote >>
eaton
EASY-E4-DC-8TE1
Technical Parameters Parameter Category Specification / Value Brand Eaton Product Series EASY E4 Product Model EASY-E4-DC-8TE1 Product Type Programmable Control Relay Power Supply 24 V DC Number of Digital Inputs 8 Number of Relay Outputs 4 (typically) Display Text Display (for programming and diagnostics) Programming Via front panel or EASY-SOFT PC software (Ladder Diagram, Function Block Diagram) Program Memory Sufficient for complex switching programs Integrated Functions Timers, Counters, Real-Time Clock, Logic functions Mounting DIN Rail Mounting (35 mm) Connection Removable screw terminal blocks

More details >> Request a Quote >>
eaton
SL7-BL24-Y 171388
Technical Parameters Parameter Category Specification / Value Brand Eaton Product Series SL7 Product Model / Catalog Number SL7-BL24-Y / 171388 Product Type 22mm Bi-Color LED Indicator Light Mounting Diameter 22 mm Lens Color Yellow (Primary indicated color) Light Source Bi-color LED (Capable of displaying two colors, e.g., Yellow and Green) Supply Voltage 24 V DC LED Technology High-brightness, long-life LED Electrical Connection Pre-wired leads or terminal base (specific type should be verified) Ingress Protection (IP) IP65 (front of panel when properly mounted) Approvals / Certifications CE, cULus

More details >> Request a Quote >>
eaton
XNE-GWBR-CANOPEN
Technical Parameters Parameter Category Specification / Value Brand Eaton Product Series XN Product Model XNE-GWBR-CANOPEN Product Type Communication Gateway / Bus Coupler Primary Function Protocol conversion between XNE-BUS and CANopen Supported Protocols • XNE-BUS (to XN PLC CPU) • CANopen (to field devices) CANopen Conformance Supports CIA DRP-303-1 version 4.02 (or similar) Data Exchange Maps process data between XN system and CANopen network Mounting DIN Rail Mounting (on XN base unit) Power Supply Powered via the XN base unit Status Indication LEDs for power, network status, and error diagnosis Compatibility Eaton XN Series PLCs

More details >> Request a Quote >>
eaton
P5-125/V/SVB/HI10
Technical Parameters Parameter Category Specification / Value Brand Eaton Product Series P5 Product Model P5-125/V/SVB/HI10 Product Type Switched-Mode Power Supply (SMPS) with SVB and High Inrush Capability Output Power 125 W Output Voltage 24 V DC Rated Output Current 5.2 A Input Voltage Range 85...264 V AC (wide range) / 120...370 V DC Input Frequency 47...63 Hz Key Feature 1 Static Voltage Buffer (SVB) - Holdup time typically ≥ 20 ms after mains failure Key Feature 2 High Inrush Capability (HI10) - Can supply up to 10x the rated current (52A) for 100 ms at 40°C to start demanding loads. Efficiency High efficiency (typically > 93%) Mounting DIN Rail Mounting (35 mm) Connection Removable screw terminal block Operating Temperature -25 °C ... +70 °C (with derating) Approvals / Certifications CE, cULus, ATEX

More details >> Request a Quote >>
eaton
NZM3-XMC-MB
Technical Parameters Parameter Category Specification / Value Brand Eaton Product Series NZM Product Model NZM3-XMC-MB Product Type Motor Protection Module (with Manual Reset) Compatibility Designed for specific frame sizes of NZM Series Circuit Breakers Protection Functions • Thermal Overload Protection (Class 10) • Phase Failure Protection • Jamming / Locked Rotor Protection Reset Mechanism Manual Reset (MB) Status Indication Trip Indicator (Flag) Control Supply Self-powered (derived from the main circuit) Mounting Side-mounted onto the NZM circuit breaker Connection Screw terminals for control wiring (e.g., trip output to contactor)

More details >> Request a Quote >>
eaton
CAN-4AI/UI
Technical Parameters Parameter Category Specification / Value Brand Eaton Product Series CAN-IO Modules (for CANopen networks) Product Model CAN-4AI/UI Product Type 4-Channel Analog / Universal Input Module Communication Protocol CANopen (CiA DRP-404) Number of Channels 4 Input Types (Configurable per channel) • Voltage: 0-10V, ±10V • Current: 0-20mA, 4-20mA • Resistance: e.g., for Pt100/1000 RTDs Resolution 16-bit Electrical Isolation Channel-to-channel and channel-to-bus isolation Power Supply 24 V DC (typical for fieldbus modules) Mounting DIN Rail Mounting (35 mm) Connection Removable screw terminal block Status Indication LEDs for power and network status

More details >> Request a Quote >>
1 2
···
75 76 77 78 79 80 81
···
175 176
Related products
C98043-A7002-L4
C98043-A7002-L4 is a power interface module board produced by SIEMENS, which is suitable for industrial automation control system. It has high performance and high reliability, and can provide stable power supply for various industrial equipment.
PR6453/110-101
Core Function:
High-temperature eddy current sensor designed for extreme environment displacement and vibration monitoring in critical rotating machinery.

Key Specifications:
• Sensitivity: 10.1 mV/µm (±5%)
• Measurement Range: 0-1.0mm (1000µm)
• Frequency Response: DC to 10kHz
• Temperature Range:

Sensor head: -40°C to +200°C (peak 250°C)

Cable: -40°C to +105°C

Robust Design Features:
✓ 8mm high-temperature probe
✓ M10×1 threaded mounting
✓ Mineral-insulated cable (5m standard)
✓ 20g vibration resistance
✓ 4MPa pressure rating

Measurement Performance:

Target material: AISI 4140 steel

Linear range: 60% of full scale

Accuracy: ±1% FS

System Integration:
• Compatible with EPRO MMS6000 systems
• High-temperature cable option
• API 670 compliant

Typical Applications:

Gas turbine blade clearance monitoring

Steam turbine shaft vibration (hot sections)

Nuclear/power plant critical equipment
5417-175 MicroNet
WOODWARD5417-175MicroNet Automation Cable Accessories are high-quality connectivity solutions designed for industrial control systems. It enables efficient data transmission and reliable signal connections for complex industrial environments such as steam and gas turbines.