Products
Products
ABB Allen-Bradley ADEPT ALSTOM
All Categories
AMAT B&R BACHMANN BENTLY Bosch Rexroth BAILEY CUTLER-HAMMER DEIF DANAHER Enterasys Extreme EATON ELAU EMERSON EPRO FANUC servo motor FOXBORO GE HIMA Honeywell ICSTriplex IFM Kollmorgen SIEMENS Schneider WOODWARD YASKAWA Omron YOKOGAWA MOOG MOTOROLA NI RELIANCE Rexroth SEW-EURODRIVE TRICONEX Weidmueller Mitsubishi SICK FISHER
home
siemens
3SE5112-0CH80
The 3SE5112-0CH80 is an emergency stop pushbutton from Siemens' 3SE5 series, featuring a 60 mm mushroom head actuator with a push-to-activate, twist-to-release mechanism. It integrates 2 NO (normally open) and 2 NC (normally closed) contacts, rated for 10 A/250 V AC or 5 A/30 V DC, with a mechanical life exceeding 1 million operations.

More details >> Request a Quote >>
siemens
3SE2924-3AA20
The 3SE2924-3AA20 is a mechanical limit switch from Siemens' 3SE2 series, featuring a roller plunger actuator with a 30 mm horizontal roller. It provides 1 NO (normally open) and 1 NC (normally closed) contact, rated for 10 A/250 V AC or 5 A/30 V DC, with a mechanical life of ≥1 million operations.

More details >> Request a Quote >>
siemens
3RW3027-1BB04
The 3RW3027-1BB04 is a 3-phase AC soft starter from Siemens, designed for motors up to 15 kW at 400 V AC or 18.5 kW at 500 V AC. It supports voltage ranges of 380–480 V (for 15 kW) and 500–690 V (for 18.5 kW), with current ratings of 32 A (400 V) and 25 A (690 V).


More details >> Request a Quote >>
siemens
6ES72213BD300XB0
6ES72213BD300XB0 Brief English Description
The 6ES72213BD300XB0 is a 16-channel digital input module for Siemens SIMATIC S7-1200, designed for DC 24 V industrial applications. It supports sink/source input configurations with a voltage range of 11–30 V DC and 4 mA rated current at 24 V. Each channel features programmable filter times (0.2–12.8 ms) to reduce noise interference.

More details >> Request a Quote >>
siemens
6ES7972-0BA12-0XA0
The 6ES7972-0BA12-0XA0 is a PROFIBUS DP Fast Connect Sub-D plug (9-pin male) for Siemens S7-300/400 systems. It supports PROFIBUS DP/V0 communication at 9.6 kbps to 12 Mbps, featuring screwless Fast Connect termination for shielded 2-wire cables. An integrated switch enables network termination with 110–120 Ω resistance for end nodes.

More details >> Request a Quote >>
siemens
6ES7151-1AA06-0AB0
6ES7151-1AA06-0AB0 Brief English Description
The 6ES7151-1AA06-0AB0 is a PROFINET Interface Module for Siemens' ET 200SP distributed I/O system, designed to connect field devices to a PROFINET network. It supports PROFINET RT/IRT communication with two RJ45 ports (10/100 Mbps, switch function) and enables media redundancy via MRP.

More details >> Request a Quote >>
siemens
6EP3332-6SB00-0AY0
The 6EP3332-6SB00-0AY0 is a 3-phase 24 V DC/10 A (240 W) smart power supply from Siemens' SITOP series. It accepts 380–480 V AC input, offers adjustable output (21.6–28.8 V DC), and features up to 94% efficiency with active PFC.

More details >> Request a Quote >>
siemens
6EP1333-2BA20
The 6EP1333-2BA20 is a 24 V DC/10 A (240 W) switch-mode power supply from Siemens' SITOP PSU8200 series. It accepts 85–264 V AC (50/60 Hz) or 110–370 V DC input, with adjustable output voltage (21.6–28.8 V DC) and up to 92% efficiency.

More details >> Request a Quote >>
siemens
3SK1121-2CB41
The 3SK1121-2CB41 is a 24 V DC on-delay time relay from Siemens' 3SK11 series, offering adjustable timing from 0.1 to 30 seconds via a dial. It features 1 NO and 1 NC delayed contacts, each rated for 5 A/250 V AC or 5 A/30 V DC.

More details >> Request a Quote >>
siemens
3RV20111GA20
The 3RV2011-1GA20 is a 1-pole thermal-magnetic motor protection circuit breaker from Siemens' SIMATIC 3RV2 series. Rated at 1 A (adjustable 0.63–1 A) for 230 V AC (50/60 Hz), it combines thermal overload protection (delayed trip) with magnetic short-circuit protection (instantaneous trip), offering 6 kA breaking capacity at 230 V AC.

More details >> Request a Quote >>
1 2
···
1457 1458 1459 1460 1461 1462 1463
···
5682 5683
Related products
CSNE151-100
Brief Description:
The Honeywell CSNE151-100 is a high-precision current sensor designed for industrial motor drives, renewable energy systems, and power electronics. It uses closed-loop Hall-effect technology to provide galvanic isolation and ultra-fast response for accurate AC/DC current measurement.

Key Features:

100A nominal / ±150A peak range for high-power applications.

<1 μs response time for dynamic load monitoring.

4.8 kV isolation for safety in high-voltage systems.

Wide bandwidth (DC–200 kHz) supports PWM and inverter applications.

Typical Applications:

Electric vehicle charging systems

Solar/wind power inverters

Industrial servo drives

Battery management systems
ABB IRB 6700-3HAC055445-001: Robotic AC Motor with Integrated Power Supply -

The ABB IRB 6700 3HAC055445-001 is a robust AC motor designed for high-performance industrial applications, featuring integrated power components for enhanced efficiency and reliability.
GE/Bently Nevada 330103-00-05-10-02-00 Original New | Precision Engineering for Industrial Control Systems -

The Bently Nevada 330103-00-05-10-02-00 is a high-performance original new module specifically designed for industrial control systems, ensuring precise and reliable monitoring and control of mechanical processes.