The GE IC200CHS022J is an essential component for industrial automation systems, offering precise control and efficient performance in various manufacturing environments.

This product is an industrial PC suite for the SIEMENS SIMATIC series, which includes a mini-box PC with WinCCflexible2008 and WinAC software pre-installed. It has a high-performance processor, supports a variety of network interfaces, and is suitable for industrial automation control and human-computer interface interaction.

Specifications: Model: FIELDVUE DLC3100 SIS Digital Level Controller Certification & Standards: IEC 61508:2010, suitable for use in SIFs up to SIL 2 (Hardware), with systematic capability up to SIL 3. Compliant with IEC 61511. Safety Authority Approval: TÜV Rheinland. Power Supply: 18 to 32 V DC (from a safety-certified power supply) Ambient Temperature Range: -40° to 75°C (-40° to 167°F) Enclosure Rating: NEMA 4X / Type 6P / IP67 Measurement & Performance: Measurement Technology: Guided Wave Radar (Tuned Waveguide) Measurement Range: Up to 6 meters (20 feet) Accuracy: ±3 mm (±0.12 in) or 0.1% of selected range, whichever is greater. Safety Output & Function: Safety Output Type: Two (2) independent, solid-state digital outputs configurable for De-energize-to-Trip (normally energized). Output Rating: 30 V DC, 0.5 A max per output. Function: Monitors level and, upon reaching a pre-set safety trip point, opens the digital outputs to de-energize the downstream safety device (e.g., a solenoid valve), causing the final element (e.g., a shut-off valve) to go to its safe state. Safety Integrity Parameters (Critical for SIS Design): Hardware Fault Tolerance (HFT): 1 Safe Failure Fraction (SFF): > 90% Probability of Failure on Demand (PFD): Low (Specific PFD values are provided in the official FMEDA report and are dependent on proof test intervals. Typical PFDavg can be in the range of 0.001 to 0.0001 for a single device). Proof Test Interval: Recommendations are provided in the product manual to maintain the designed Safety Integrity Level. Materials & Process Connection: Process Connection: 2-inch NPT or other flanged connections. Probe Material: 316L Stainless Steel (standard).