Key Parameters Item Parameter / Description Valve Type Proportional directional control valve Actuation Solenoid-operated proportional spool Valve Size / Interface ISO 4401‑05 / NFPA D05 / CETOP 5 (NG10) Maximum Operating Pressure (P, A, B ports) 315 bar (≈ 4565 psi) Tank Port (T) Pressure Rating 210 bar (≈ 3045 psi) Maximum Flow Rate Up to 120 L/min (≈ 31.7 US gpm) Seal Material Viton (standard) Spool Type ABM-type proportional spool Fluid Compatibility Petroleum-based hydraulic oils Fluid Cleanliness Recommendation 19/17/14 (micron) Operating Temperature Range –20 °C to +70 °C (–4 °F to +158 °F) Mounting Type Subplate / manifold mounted Electrical Connector Standard ISO 4400 / DIN 43650 Coil Power 35 W

Key Parameters Item Parameter / Description Valve Type Proportional directional control valve Actuation Solenoid-operated proportional spool Valve Size / Interface ISO 4401‑05 / NFPA D05 / CETOP 5 (NG10) Maximum Operating Pressure (P, A, B ports) 315 bar (≈ 4565 psi) Tank Port (T) Pressure Rating 210 bar (≈ 3045 psi) Maximum Flow Rate Up to 120 L/min (≈ 31.7 US gpm) Seal Material Viton (standard) Spool Type PP-type proportional spool Fluid Compatibility Petroleum-based hydraulic oils Fluid Cleanliness Recommendation 19/17/14 (micron) Operating Temperature Range –20 °C to +70 °C (–4 °F to +158 °F) Mounting Type Subplate / manifold mounted Electrical Connector Standard ISO 4400 / DIN 43650 Coil Power 35 W

Parameter Description / Value Notes Product Line Eaton DG5V Manual Directional Control Valve Series Valve Size 8 Nominal size 08, corresponding to a specific flow capacity. Actuator Type H (Spring Centered with Detents) Specifies the combination of springs and detent mechanisms for spool positioning. Spool Configuration OAL (4-Position, Complex Pattern) Positions: 1. Left Shift, 2. Spring-Centered, 3. Right Shift, 4. Detented (Float/Parallel). See below for details. Spool Type E This refers to the internal spool design and metering characteristics, often a standard industrial type. Porting Style U (Subplate Mounted) Mounts to ISO 4401-08-... or NFPA D08 interface. Main Seal Material H (Standard Nitrile Rubber / NBR) Compatible with standard mineral-based hydraulic oils. Maximum Operating Pressure 350 bar (5,075 psi) Maximum Flow Rate Approx. 75 - 110 L/min (20 - 29 US gpm) Dependent on spool and pressure drop. Manual Lever Force Typically < 60 N (13.5 lbf) Force required to shift the spool.

Key Parameters Item Parameter / Description Valve Type Proportional directional control valve Actuation Solenoid-operated proportional spool Valve Size / Interface ISO 4401‑10 / NFPA D10 / CETOP 10 (NG32) Maximum Operating Pressure (P, A, B ports) 250 bar (≈ 3625 psi) Tank Port (T) Pressure Rating 100 bar (≈ 1450 psi) Maximum Flow Rate Up to 250 L/min (≈ 66 US gpm) Seal Material Viton (standard) Spool Type Direct-acting proportional spool, CM-type Fluid Compatibility Petroleum-based hydraulic oils Fluid Cleanliness Recommendation 18/16/13 (micron) Operating Temperature Range –20 °C to +70 °C (–4 °F to +158 °F) Mounting Type Subplate / manifold mounted Electrical Connector Standard ISO 4400 / DIN 43650 Coil Power 35–40 W (depending on variant)

Key Parameters Item Parameter / Description Valve Type Proportional cartridge valve Actuation Solenoid-operated proportional spool Valve Size / Interface ISO / NG10 standard cartridge cavity Maximum Operating Pressure (P, A, B ports) 315 bar (≈ 4565 psi) Tank Port (T) Pressure Rating 210 bar (≈ 3045 psi) Maximum Flow Rate Up to 120 L/min (≈ 31.7 US gpm) Seal Material Viton (standard) Spool Type DA3G-type proportional spool Fluid Compatibility Petroleum-based hydraulic oils Fluid Cleanliness Recommendation 19/17/14 (micron) Operating Temperature Range –20 °C to +70 °C (–4 °F to +158 °F) Mounting Type Subplate / manifold mounted Electrical Connector Standard ISO 4400 / DIN 43650 Coil Power 35 W

Key Parameters Item Parameter / Description Part Type Solenoid coil / coil assembly Voltage 24 V DC Duty Continuous duty Connector Type Lead-wire connection (flying leads) Weight Approx. 0.27–0.30 kg Dimensions Approx. 1.83” × 1.53” × 2.50” Fluid Compatibility Standard hydraulic fluids (e.g., MIL‑H‑5606, SAE 10, SAE 20) Mounting Fits onto compatible Eaton/Vickers hydraulic valve bodies

Key Parameters Item Parameter / Description Function Type Relief Valve (pilot‑operated) with reverse free‑flow check Mounting Style Cartridge valve (screw‑in cartridge) Valve Series / Cavity RV2‑10 series, C‑10‑2 cavity (standard cartridge cavity) Maximum Operating Pressure 350 bar (≈ 5000 psi) Typical Flow Capacity Up to 114 L/min (≈ 30 US gpm) Pressure Setting Adjustable (via screw/adjustment type) — factory example ~ 192.5 bar, but user‑adjustable depending on system needs Fluid Compatibility Standard hydraulic fluids (e.g. MIL‑H‑5606, SAE 10, SAE 20, etc.) Intended Use Pressure relief or system protection; can also protect work ports in directional valve circuits Flow Direction / Check Valve Behavior Flow from port 1 → port 2 when relieving; reverse flow (port 2 → port 1) allowed when pressure drops (free‑flow through check)

Key Parameters Item Value / Description Actuation Type Solenoid operated Coil Voltage 24 V DC Design Series 61 Series Electrical Connection ISO 4400 (DIN 43650) connector Maximum Operating Pressure (P, A, B ports) 350 bar (≈ 5000 psi) Tank Port (T) Pressure Rating 210 bar (≈ 3000 psi) Maximum Flow Rate 80 L/min (≈ 21 US gpm) Fluid Compatibility Petroleum hydraulic oils Seal Material Viton Spool Type Spool “8B” Spring Arrangement Spring offset (end-to-center) spool return Valve Size / Interface ISO 4401‑03 / NFPA D03 / CETOP 3 (NG6) Power Consumption (Coil) 30 W Fluid Cleanliness Recommendation 19/17/14 µm Operating Ambient Temperature Range –20 °C to +70 °C (–4 °F to +158 °F) Mounting Type Subplate / manifold mounted Valve Type Directional control valve (4/3‑way)

Key Parameters Item Value / Description Valve Type Flow regulator / flow control valve Valve Size / Interface ISO / NG8 standard mounting interface Maximum Operating Pressure (P, A ports) 350 bar (≈ 5075 psi) Maximum Flow Rate 8 L/min (≈ 2.1 US gpm) Flow Setting Fixed at 1.0 L/min (can vary with model designation) Seal Material Viton (standard) Fluid Compatibility Petroleum-based hydraulic oils Fluid Cleanliness Recommendation 19/17/14 µm Operating Temperature Range –20 °C to +70 °C (–4 °F to +158 °F) Mounting Type Subplate / manifold mounted Adjustment Method Fixed or factory-set orifice (depending on variant)

Key Parameters Item Value / Description Valve Type Flow regulator / flow control valve Valve Size / Interface ISO / NG10 standard mounting interface Maximum Operating Pressure (P, A ports) 350 bar (≈ 5075 psi) Maximum Flow Rate 10 L/min (≈ 2.6 US gpm) Flow Setting Fixed at 4.0 L/min (as per model designation) Seal Material Viton (standard) Fluid Compatibility Petroleum-based hydraulic oils Fluid Cleanliness Recommendation 19/17/14 µm Operating Temperature Range –20 °C to +70 °C (–4 °F to +158 °F) Mounting Type Subplate / manifold mounted Adjustment Method Fixed or factory-set orifice (depending on variant)