The Yokogawa ASD143-P00 is a 16-channel isolated digital input module for industrial automation and control applications. It supports NAMUR-compatible digital signals (IEC 60947-5-6), includes built-in isolation barriers, and ensures safe and reliable input signal acquisition in process environments.

The Yokogawa ASR133-S00 is an 8-channel isolated RTD/POT (Resistance Temperature Detector / Potentiometer) input module, compatible with Yokogawa’s CENTUM VP and CS3000 distributed control systems (DCS). It supports precise temperature and position sensing in industrial automation applications.

The Yokogawa ASI143-S00 is a single-channel, non-isolating (zener) safety barrier designed for DC switch input (discrete input) signals in intrinsically safe (IS) applications. Its primary function is to protect hazardous areas by limiting the voltage and current that can reach a field device, such as a mechanical switch, proximity sensor, or electromechanical relay. It provides a passive signal path for the dry contact signal to the control system in the safe area (e.g., a PLC/DCS digital input card). The "-S00" suffix denotes a standard configuration within this series.

The Yokogawa AXFC-4-20 is a remote-mounted converter for use with AXF series sensor units. It provides the signal processing, power, and communication interfaces. This model features a 4-20 mA analog output and supports the HART 7 protocol for digital communication, configuration, and diagnostics. It is designed for flexible panel or wall mounting away from the sensor.

The Yokogawa AXFA41C-D1-21/CH is a flanged-type magnetic flowmeter sensor. It is designed for accurate and reliable volumetric flow measurement of conductive liquids. This specific configuration features a PTFE liner for excellent chemical resistance and 316L stainless steel electrodes for general-purpose use. It comes with a calibration certificate to ensure traceable accuracy out of the box.

The Yokogawa ALF111-S00 is a non-isolating, passive zener safety barrier designed specifically for use with thermocouples in intrinsically safe (IS) applications. Its primary function is to protect hazardous areas by limiting the amount of energy (voltage and current) that can reach the thermocouple, preventing ignition of flammable atmospheres. This model provides a direct, passive signal path for the millivolt (mV) signal from the thermocouple to the safe-area measuring device (e.g., DCS, PLC, recorder) without amplification or conversion. The "-S00" suffix denotes a specific configuration within this series.

The Yokogawa AAI141-S50 is a single-channel, non-isolating (zener) safety barrier designed for basic intrinsic safety (IS) protection. It safeguards hazardous areas by utilizing zener diodes and resistors to clamp voltage and limit current to safe levels. This cost-effective model is specifically designed for 4-20 mA two-wire transmitters and provides a pass-through of the current signal to the control system in the safe area. The "-S50" suffix indicates it is designed for mounting on a standard 35mm DIN rail.

The Yokogawa AAI141-H53 is a high-density, single-channel, DC input isolating safety barrier designed for intrinsic safety (IS) applications. It provides protection for hazardous areas by limiting the energy (voltage and current) that can reach field devices. This model is specifically designed to convert input signals from 4-20 mA two-wire transmitters in the hazardous area into isolated and amplified 4-20 mA output signals for control systems in the safe area. The "-H53" suffix indicates it is optimized for ultra-high-density mounting on 35mm DIN rails.

The Yokogawa AAI141-H50 is a single-channel, DC input isolating safety barrier. Its primary function is to protect hazardous areas by limiting the energy (voltage and current) that can reach field devices, ensuring intrinsic safety. It converts input signals from field devices like 4-20 mA analog transmitters (2-wire) into isolated and amplified output signals for the control system in the safe area. The "-H50" suffix indicates a high-density model designed for efficient mounting on a 50mm DIN rail.

The Yokogawa AXF150C-PNCE1L-AA11-2NB/NF21/CH is a full-bore, flanged magnetic flowmeter (Magmeter) designed for highly accurate and reliable volumetric flow measurement of conductive liquids. This specific configuration is packed with advanced features, including a PTFE PFA-lined measuring tube for exceptional chemical resistance, dual-frequency excitation for stable measurement on fluids containing noise-generating solids or bubbles, and a HART® 7 communication protocol. It is designed for a 6-inch (150 mm) pipeline and comes with a grounding ring and an integral remote-type converter for flexible mounting.