The Weidmüller WTS4 PT100/3 C 0/4-20MA is an RTD signal converter designed for connecting PT100 resistance temperature sensors in 3-wire technology . It converts the measured resistance value into a linear, proportional analog DC signal (0/4...20 mA) for further processing in industrial control systems .

The ACT20P-CI-2CO-S is a DC signal isolator and signal multiplier from Weidmüller's ACT20P series. It accepts one standard analog current input signal (0/4...20 mA) and provides two isolated, linearized output current signals.

The KLBUE CO 1 (Order No. 1753311001) is a shielding terminal clamp from Weidmüller. Designed for direct mounting on a busbar, it provides a simple and effective method for clamping and terminating cable shields to ground, helping to protect against electrical and magnetic interference.

The Weidmüller EBB 25-50/16 AM is a robust potential distributor terminal with screw connection technology. It is made of brass and is designed for mounting on a TS 35 rail . This terminal block allows for the creation of a decentralized equipotential bonding system.

The EPAK-PCI-CO is a compact analog signal isolator from Weidmüller's EPAK series. It safely isolates, converts, and monitors analog signals, with configuration performed via DIP switches on the device. This model is designed for applications that do not require international approvals but demand high interference resistance.

The ACT20X-2HTI-2SAO-S is a 2-channel Ex signal isolating converter from Weidmüller. It transmits analog signals from RTD, thermocouple, and 0/4...20 mA sources from hazardous areas (up to Zone 0) to the safe area with 3-way galvanic isolation. The module supports SIL 2 functional safety per IEC 61508 and is configured via FDT/DTM software .

The Weidmüller VDATA CAT6 (Order No. 1348590000) is a modular surge arrester for DIN rail mounting. It is specifically designed to protect up to Cat.6 (Class E) data transmission lines operating at frequencies up to 250 MHz.

Weidmüller VPU AC II 1 300/50 (Part No. 2591020000) is a DIN rail mounted Type 2+Type 3 combined single-phase AC surge protective device, specially designed for low-voltage distribution systems to protect electrical equipment from transient lightning surges and switching overvoltage damage.

Weidmüller ACT20X-2HAI-2SAO-P is a 2-channel intrinsically safe HART transparent signal isolator, designed for hazardous area process automation applications. It achieves galvanic isolation between intrinsically safe Ex field side and safe control side, safely transmitting 4–20mA analog current signals from Zone 0/1 hazardous areas to DCS/PLC systems in safe zones, while supporting bidirectional transparent HART protocol communication for smart transmitter parameter configuration and diagnosis

Weidmüller ACT20P-CI2-CO-OLP-S is a DIN rail mounted 2-channel passive galvanic signal isolator, loop-powered via the output 4–20mA current loop without separate auxiliary power supply. It realizes electrical isolation for two-channel standard 4–20mA analog current signals, effectively eliminating ground loop interference, protecting PLC and DCS control equipment from surge voltage and electromagnetic noise.