Technical Specifications Parameter Specification Brand OMRON Model TL-W5F2 Series TL-W Type Flat Inductive Proximity Sensor Sensing Method Inductive Sensing Distance 5 mm ±10% Setting Distance 0 to 4 mm Shielding Shielded (flush mountable) Output Configuration PNP - NC (Normally Closed), 3-wire Supply Voltage 10 to 30 VDC (12 to 24 VDC ripple 20% max.) Current Consumption 15 mA max. (at 24 VDC, no load) Switching Capacity 200 mA max. Response Frequency 300 Hz (average value) Indicator Detection indicator (red LED) Connection Method Pre-wired cable (standard 2 m length) Degree of Protection IP67 (IEC) / Oil-proof (Company standard) Operating Characteristics Parameter Value Sensing Object Ferrous metal (sensitivity lowers with non-ferrous metals) Standard Sensing Object Iron, 18 × 18 × 1 mm Differential Travel (Hysteresis) 10% max. of sensing distance Temperature Influence ±10% max. of sensing distance at 23°C over -25 to 70°C range Voltage Influence ±2.5% max. of sensing distance at rated voltage ±10% Environmental & Mechanical Specifications Parameter Specification Ambient Temperature (Operating) -25 to 70°C Ambient Temperature (Storage) -25 to 70°C Ambient Humidity (Operating) 35% to 95% Insulation Resistance 50 MΩ min. (at 500 VDC) between charged parts and case Dielectric Strength 1,000 VAC, 50/60 Hz for 1 minute between charged parts and case Vibration Resistance (Destruction) 10 to 55 Hz, 1.5 mm double amplitude, 2 hours each in X, Y, Z directions Shock Resistance (Destruction) 500 m/s², 3 times each in X, Y, Z directions Housing Material Case: Die-cast aluminum / Sensing surface: Heat-resistant ABS resin Dimensions (W × H × D) 25 × 10 × 50 mm Weight Approx. 80 g