Technical Specifications Parameter Specification Brand OMRON Model TL-N5ME15 (with 5M cable) Series TL-N Type Rectangular Standard Proximity Sensor Sensing Method Inductive Sensing Distance 5 mm ±10% Setting Distance 0 to 4 mm Shielding Unshielded Output Configuration NPN - NO (Normally Open), 3-wire Supply Voltage 10 to 30 VDC (12 to 24 VDC ripple 10% max.) Current Consumption 8 mA max. at 12 VDC / 15 mA max. at 24 VDC Switching Capacity 100 mA max. at 12 VDC / 200 mA max. at 24 VDC Residual Voltage 1 V max. (at 200 mA load current) Response Frequency 500 Hz (average value) Indicator Detection indicator (red LED) Connection Method Pre-wired cable, 5 meters Degree of Protection IP67 (IEC) / Oil-proof (Company standard) Operating Characteristics Parameter Value Sensing Object Ferrous metal (sensitivity decreases for non-ferrous metals) Standard Sensing Object Iron, 30 × 30 × 1 mm Differential Travel (Hysteresis) 15% max. of sensing distance Temperature Influence ±10% max. of sensing distance at 23°C over -25 to 70°C range Voltage Influence ±2.5% max. of sensing distance at rated voltage ±10% Environmental & Mechanical Specifications Parameter Specification Ambient Temperature (Operating) -25 to 70°C (with no icing or condensation) Ambient Temperature (Storage) -25 to 70°C Ambient Humidity (Operating) 35% to 95% (with no condensation) Insulation Resistance 50 MΩ min. (at 500 VDC) between charged parts and case Dielectric Strength 1,000 VAC, 50/60 Hz for 1 min between charged parts and case Vibration Resistance (Destruction) 10 to 55 Hz, 1.5 mm double amplitude, 2 hours each in X, Y, Z directions Shock Resistance (Destruction) 500 m/s², 10 times each in X, Y, Z directions Housing Material Case & Sensing surface: Heat-resistant ABS resin (plastic) Dimensions (H × W × D) 25.5 × 25 × 38.5 mm