Schneider - Products - Easy Semiconductor Technology (Hong Kong) Limited 易擇半導體科技(香港)有限公司

Schneider

NSX 3P 630NA

The Schneider Electric Compact NSX is a high-performance Moulded Case Circuit Breaker (MCCB). The model NSX630NA indicates a 630A frame size, with an N-type (High) breaking capacity and a 3-pole configuration. The "A" suffix specifies a particular variant regarding mounting, termination, or trip unit style, which must be confirmed with the detailed catalog.

More details >> Request a Quote >>

Schneider

PRD 3P+N 40KA

The Schneider Electric PRD is a Type 1+2 Combined Surge Protective Device (SPD) with a 3P+N (3-phase + neutral) configuration and an enhanced maximum discharge current (Imax) of 40 kA per phase. Designed for high-risk exposure environments, it provides the highest level of primary surge protection at the service entrance against direct or indirect lightning strikes and severe switching transients in low-voltage AC power systems

More details >> Request a Quote >>

Schneider

GV3ME80 56-80A

The Schneider Electric GV3ME80 is a motor circuit protector from the TeSys GV3 range, specifically designed for direct online starting and protection of three-phase motors. The model GV3ME80 indicates a thermal-magnetic trip unit with an adjustable overload current setting range of 56 to 80 Amps.

More details >> Request a Quote >>

Schneider

EZD 3P 630A

The Schneider Electric EZD is a compact and economical 3-Pole, 630A Moulded Case Circuit Breaker (MCCB). Designed for simplicity and reliable protection in high-current three-phase distribution systems, it provides essential defense against overloads and short-circuits.

More details >> Request a Quote >>

Schneider

MT400/630

The Schneider Electric Masterpact MT is a premium Air Circuit Breaker (ACB) from the high-performance Masterpact range. The MT400/630 refers to a specific frame size designed to accommodate continuous current ratings from 400A to 630A.

More details >> Request a Quote >>

Schneider

IC65N 3P C10A

The Schneider Electric iC65N is a standard-breaking capacity, 3-Pole, 10A Miniature Circuit Breaker (MCB) with a Type C tripping characteristic. Part of the globally recognized Acti 9 iC60 series, it is a fundamental protection device designed for three-phase circuits in residential, commercial, and light industrial electrical installations.

More details >> Request a Quote >>

Schneider

IPRF1 3P 12.5KA

The Schneider Electric iPRF1 is a Type 3 Surge Protective Device (SPD) / Point-of-Use Protector with a 3-pole (3-phase) configuration and a maximum discharge current (Imax) of 12.5 kA per mode.

More details >> Request a Quote >>

Schneider

NSX 4P 630S 630A

The Schneider Electric Compact NSX is a top-tier Moulded Case Circuit Breaker (MCCB). This model features a 630A frame size (NSX630), S-type (Very High) breaking capacity, 4-pole (3P+N) configuration, and is rated for 630A.

More details >> Request a Quote >>

Schneider

WATSGA100//4

The Schneider Electric WATSGA100/4 is a 4-pole (3P+N), 100A manual changeover switch from the reliable WATSGA series. It is designed for the safe and reliable manual transfer of electrical loads between two independent three-phase AC power sources (e.g., Utility Main and Generator Backup).

More details >> Request a Quote >>

Schneider

EZD 3P 400E

The Schneider Electric EZD is a compact and economical 3-Pole, 400A Moulded Case Circuit Breaker (MCCB). Designed for simplicity and reliable protection in three-phase distribution systems, it provides essential defense against overloads and short-circuits.

More details >> Request a Quote >>