Specifications Parameter Specification Power Rating 100 W Output Voltage 12 VDC Output Current (Rated) 8.5 A Output Voltage Adjustment Range -10% to +15% (with V.ADJ) Rated Input Voltage 100 to 240 VAC (Single-phase) Allowable Input Voltage Range 85 to 264 VAC / 80 to 370 VDC Frequency 50/60 Hz (47 to 450 Hz) Rated Input Current 2.1 A typ. (at 100 VAC) / 1.2 A typ. (at 200 VAC) Efficiency (Typical) 84% (100 VAC) / 86% (200 VAC, 230 VAC) Inrush Current (Cold start) 14 A typ. (100 VAC) / 28 A typ. (200 VAC) Leakage Current 0.5 mA max. (100 VAC) / 1 mA max. (200 VAC) Ripple & Noise 90 mV(p-p) max. Start Up Time 1000 ms max. Hold Time 11 ms typ. (100 VAC) / 55 ms typ. (200 VAC) Protection & Functions Parameter Specification Overload Protection Yes (Automatic reset, 105% to 160% of rated current) Overvoltage Protection Yes (Shut down, restart by power cycling, approx. 13.8 V to 16.2 V) Overheat Protection No Series Operation Yes (Up to 2 Power Supplies with external diode) Parallel Operation No Output Indicator Yes (Green LED) Environmental & General Parameter Specification Ambient Temperature (Operating) -20 to 70 °C (with derating based on mounting) Ambient Temperature (Storage) -25 to 75 °C Ambient Humidity 90% RH max. Dielectric Strength 3 kVAC between input and output (1 min) Degree of Protection IP20 (Internal) Life Expectancy 10 years min. (at 40°C, 50% load, standard mounting) Construction Covered type Terminal Type Screw terminal block Mounting Method Direct mounting (Screw holes), DIN Rail mounting (optional bracket required) Dimensions (W x H x D) 38 x 97 x 143.3 mm (approx.) Weight 400 g max. Agency Approvals UL, cUL, TUV, CE, CCC