Key Technical Parameters Type ACT20P-CI-2CO-S Version Signal splitter/isolator, Input: 1 x 0(4)-20 mA, Output: 2 x 0(4)-20 mA Product Status Active Dimensions & Weight Parameter Specification Width 12.5 mm (0.492 inch) Height 117.2 mm (4.614 inch) Depth 113.7 mm (4.476 inch) Net weight 157 g Input Specifications Parameter Specification Number of inputs 1 Input signal 0…20 mA, 4…20 mA Sensor supply > 17 V DC at 20 mA, max 30 V @ open circuit Voltage drop ca. 3.8 V @ RLoad = 0 Ω; ca. 15 V @ RLoad = 600 Ω HART® capability Yes, bidirectional transmission Output Specifications Parameter Specification Number of outputs 2 Output signal 0…20 mA (if input: 0…20 mA), 4…20 mA (if input: 4…20 mA) Output type Active (connected control must be passive) Load impedance (current) < 300 Ω Power Supply Parameter Specification Supply voltage 20…30 V DC Current consumption ≤ 60 mA (24V supply, 20mA output) Power consumption ≤ 1.8 W General Specifications Parameter Specification Accuracy < 0.1 % of end value Step response time ≤ 0.5 ms Temperature coefficient 80 ppm/K Galvanic isolation 3-way isolator (input/output/power) Insulation voltage 2 kV (input/output/power) Impulse withstand voltage 4 kV (1.2/50 µs) Mounting rail TS 35 Protection degree IP20 Connection Data Parameter Specification Connection type Screw connection Tightening torque (min/max) 0.4 Nm / 0.6 Nm Clamping range (min/max) 0.5 mm² / 2.5 mm² AWG range (min/max) AWG 26 / AWG 12 Environmental & Compliance Parameter Specification Operating temperature -20°C … +60°C Storage temperature -40°C … +85°C Humidity 5…95%, no condensation Operating altitude ≤ 2000 m Standards EN 61010-1:2011, UL 61010-1, EN 61326-1 ATEX marking II 3 G Ex ec IIC T5 Gc Certifications cULus (E469563), CE RoHS status Compliant with exemption REACH SVHC Lead (7439-92-1)