Key Technical Parameters Parameter Specification Order No. 8690200000 Type RCM570024 Version RIDERSERIES RCM, Relay, 4 CO contacts (AgNi), 24 V DC coil, 6 A, Plug-in connection Product Status Active Quantity per package 10 pc(s) Dimensions & Weight Parameter Specification Width 22.5 mm (0.886 inch) Height 28 mm (1.102 inch) Depth 29 mm (1.142 inch) Net weight 29.9 g Control Side (Coil) Parameter Specification Rated control voltage 24 V DC ±10% Rated current DC 30.9 mA Rated power 741 mW Coil resistance 777 Ω ± 10% Must operate voltage 18 V DC Must release voltage 2.4 V DC Status indicator No (no LED) Test button available Yes (lockable and momentary) Load Side (Contacts) Parameter Specification Contact type 4 CO (4PDT) - AgNi (silver-nickel) Contact resistance ≤ 50 mΩ Rated switching voltage 240 V AC Max. switching voltage, AC 250 V / 400 V Max. switching voltage, DC 220 V Continuous current 6 A Inrush current 12 A / 20 ms Max. AC switching capacity (resistive) 1500 VA Max. DC switching capacity (resistive) 144 W @ 24 V Min. switching power 1 mA @ 24 V, 10 mA @ 12 V, 100 mA @ 5 V Switch-on delay (operate time) ≤ 15 ms Switch-off delay (release time) ≤ 10 ms Max. switching frequency at rated load 0.1 Hz Mechanical service life 30 × 10⁶ switching cycles (DC coil) Insulation & Protection Parameter Specification Rated voltage 250 V Overvoltage category III Pollution severity 2 Protection degree IP20 Dielectric strength (coil to contacts) 2.5 kVeff / 1 min Dielectric strength (adjacent contacts) 2 kVeff / 1 min Impulse withstand voltage 5 kV (1.2/50 µs) Clearance & creepage (coil to contacts) ≥ 4 mm Flammability rating (housing) UL 94 V-2 Environmental & Compliance Parameter Specification Operating temperature -40 °C … +70 °C Storage temperature -40 °C … +85 °C Humidity 40°C / 93% rel. humidity, no condensation RoHS status Compliant