Key Technical Parameters Parameter Specification Order No. 7907400000 Type ZPE 6/3AN Version PE terminal, Tension-clamp connection, 6 mm², 720 A (6 mm²), Green/yellow GTIN (EAN) 4032248422395 Quantity per package 50 pc(s) Dimensions & Weight Parameter Specification Width 8.1 mm (0.319 inch) Height 90 mm (3.543 inch) Depth 45 mm (1.772 inch) Depth including DIN rail 45.5 mm Net weight 31.21 g Electrical Specifications (IEC) Parameter Specification Rated cross-section 6 mm² Rated voltage 800 V Rated DC voltage 800 V Rated impulse withstand voltage 8 kV Volume resistance 0.78 mΩ Power loss 1.31 W Pollution severity 3 PE Rating Data Parameter Specification Rated short-time current 720 A (for 6 mm²) PE connection Yes PEN function No Connection Data Parameter Specification Connection type Tension-clamp connection Number of connections 3 Connection direction Top (vertical) Stripping length 13 mm Blade size 0.6 x 3.5 mm Clamping range, min. 0.22 mm² Clamping range, max. 10 mm² Wire Connection Cross-Sections Conductor Type Min Max Solid wire 0.5 mm² (AWG 22) 10 mm² (AWG 8) Stranded wire 0.5 mm² (AWG 22) 10 mm² (AWG 8) Fine-stranded with ferrule 0.5 mm² (AWG 22) 6 mm² AWG range AWG 22 AWG 8 Material & Environmental Parameter Specification Material Wemid Colour Green/Yellow Flammability rating UL 94 V-0 Continuous operating temp., min. -50 °C Continuous operating temp., max. 120 °C Storage temperature -25 °C...55 °C Hazardous Location Ratings (ATEX/IECEx) Parameter Specification Explosion-tested version Yes Certificate No. (ATEX) DEMKO15ATEX1467U Certificate No. (IECEX) IECEXULD15.0008U Max. voltage (ATEX/IECEX) 800 V (system) Wire cross section max. (ATEX/IECEX) 10 mm² Marking EN 60079-7 Ex eb II C Gb Ex 2014/34/EU label II 2 G D UL/cURus Ratings Parameter Specification Certificate No. (cURus) E60693 Wire size (UL) 22...8 AWG Voltage (UL) 600 V Current (UL) — CSA Ratings Parameter Specification Certificate No. (CSA) 200039-1152892 Wire cross section (CSA) 20...8 AWG Voltage (CSA) 600 V Mounting & Configuration Parameter Specification Mounting rail TS 35 Mounting type Snap-on End cover plate required Yes Open sides Right Number of potentials 1 Number of levels 1 Standards IEC 60947-7-2 RoHS status Compliant without exemption