Key Technical Parameters Parameter Specification Order No. 1478210000 Type PRO MAX 70W 5V 14A Product Status Active Dimensions & Weight Parameter Specification Width 32 mm (1.26 inch) Height 130 mm (5.118 inch) Depth 125 mm (4.921 inch) Net weight 650 g Input Specifications Parameter Specification Input Phases Single-phase (1AC) Rated Input Voltage 100...240 V AC / 120...340 V DC AC Input Range 85…277 V AC DC Input Range 80…370 V DC Frequency Range AC 45…65 Hz AC Current Consumption (typ.) 1 A @ 230 V AC / 1.5 A @ 115 V AC DC Current Consumption (typ.) 1.5 A @ 120 V DC Inrush Current (max.) 15 A Recommended Back-up Fuse 6 A Char. B or 3-5 A Char. C circuit breaker Internal Input Fuse Yes Surge Protection Varistor Connection System (Input) Screw connection Input Terminals 3 (L/N/PE) Output Specifications Parameter Specification Rated Output Voltage 5 V DC ± 1% Output Voltage Range 4.5 … 7 V DC (adjustable via potentiometer) Output Power 70 W Rated Output Current 14 A @ 60 °C Continuous Output Current (Power Boost) 16.8 A @ 45°C / 10.5 A @ 70°C Peak Load Capability (300%) 42 A for 2 ms Residual Ripple < 50 mVpp @ rated load Efficiency (typ.) 86% AC Failure Bridging Time > 20 ms @ 230/115 V AC Parallel Connection Option Yes, max. 5 units Reverse Polarity Protection Yes Short-circuit Protection Yes (>120% I额定, current limiting) Connection System (Output) Screw connection Output Terminals 8 (++, ---, 11, 13, 14) General Specifications Parameter Specification Efficiency (typ.) 86% Power Loss (nominal load) 11.7 W Power Loss (idling) 1 W MTBF (at 25°C / 230 V AC) ≥ 1,400,000 h (acc. to SN 29500) Protection Class I (with PE connection) Protection Degree IP20 Overvoltage Category III Pollution Severity 2 Insulation Voltage (Input/Output) 4 kV Insulation Voltage (Input/Earth) 3.5 kV Insulation Voltage (Output/Earth) 0.5 kV Housing Material Metal, corrosion resistant Mounting TS 35 DIN rail (horizontal) Mounting Clearance 50 mm top & bottom for air circulation; can mount side by side with no space Operating Temperature -25 °C … +70 °C Derating > 60 °C / 75% @ 70 °C Start-up Temperature ≥ -40 °C Storage Temperature -40 °C … +85 °C Humidity 5…95% (non-condensing) Operating Altitude 3000 m nominal / up to 6000 m with derating Connection Data (Input) Parameter Specification Connection System Screw connection Solid wire (min-max) 0.18…6 mm² (AWG 26…10) Flexible wire (min-max) 0.22…4 mm² Tightening torque (min-max) 0.5…0.6 Nm Screwdriver blade 0.8 x 4.0 mm / PZ 1 Connection Data (Output) Parameter Specification Connection System Screw connection Solid wire (min-max) 0.5…6 mm² (AWG 26…12) Flexible wire (min-max) 0.5…4 mm² Tightening torque (min-max) 0.5…0.6 Nm Screwdriver blade 0.6 x 3.5 mm Signaling & Diagnostics Parameter Specification LED Indicator Green/Red multi-color LED LED green Operation (Uout ≥ 4.5 V DC), relay on LED red Fault (Uout ≤ 4.0 V DC), relay off Status Relay (Floating Contact) Output voltage OK (max. 30 V DC / 1 A) Environmental & Compliance Parameter Specification Noise Emission (EN55032) Class B Shock Resistance (IEC 60068-2-27) 30 g in all directions Vibration Resistance (IEC 60068-2-6) 2.3 g Standards SELV (IEC 60950-1), PELV (EN 60204-1), EN 61558-2-16 Certifications cULus (E255651/E258476), cULusEX (E470829) RoHS Status Compliant with exemption REACH SVHC Lead (7439-92-1)