Products
Products
home
Industrial Grade Communication Module TRS24VDC1CO

the Weidmüller relay module TRS 24VDC 1CO (Order No. 1122770000).It is a complete relay module consisting of an electromechanical relay and a base with screw-type terminals, designed for DIN rail mounting in industrial control cabinets.

open
TEL:+86 13600179521
Mail:info@easyautomationparts.com
info@easyautomationparts.com
WhatsApp
Parameters
Request a Quote
Return to List
Key Technical Parameters General Data Parameter Value Version TERMSERIES, Relay module Type TRS 24VDC 1CO Order No. 1122770000 GTIN (EAN) 4032248904808 Quantity 10 pc(s) Dimensions and Weight Parameter Value Width 6.4 mm (0.252 inch) Height 89.6 mm (3.528 inch) Depth 87.8 mm (3.457 inch) Net weight 33 g Control Side (Input) Parameter Value Rated control voltage 24 V DC ±20 % Rated current (DC) 11.5 mA Power rating 280 mW Status indicator Green LED Protective circuit Free-wheeling diode, Reverse polarity protection Replacement relay coil voltage 24 V DC Load Side (Output) Parameter Value Contact type 1 changeover contact (SPDT / 1 Form C) Contact material AgNi (Silver Nickel) Continuous current 6 A Rated switching voltage 250 V AC Max. switching voltage, AC 250 V Max. switching voltage, DC 250 V Max. AC switching capacity (resistive) 1500 VA Max. DC switching capacity (resistive) 144 W @ 24 V Inrush current 20 A / 20 ms Switch-on delay ≤ 6 ms Switch-off delay ≤ 16 ms Max. switching frequency at rated load 0.1 Hz Min. switching power 1 mA @ 24 V, 10 mA @ 12 V, 100 mA @ 5 V Mechanical service life 5 x 10⁶ switching cycles Connection Data (Screw Connection) Parameter Value Wire connection method Screw connection Stripping length 8 mm Tightening torque, max. 0.4 Nm Clamping range, min. 0.14 mm² Clamping range, max. 2.5 mm² AWG range (min/max) AWG 26 / AWG 14 Screwdriver blade size PH0 Insulation & Safety Parameter Value Rated voltage 300 V Pollution severity 2 Overvoltage category III Clearance and creepage (control-load) ≥ 6 mm Dielectric strength (control-load) 4 kVeff / 1 min (reinforced insulation) Dielectric strength (open contact) 1 kVeff / 1 min Dielectric strength to mounting rail 4 kVeff / 1 min Impulse withstand voltage 6 kV (1.2/50 µs) Protection degree IP20