OMRON Distributor | PLC Servo Sensors Robots Supplier

E3T-FT11F Safety Light Curtain | F3SJ Series Industrial Safety Sensor

The E3T-FT11F is a miniature, built-in amplifier photoelectric sensor from Omron's E3T series. It is designed for applications where space is extremely limited, featuring an ultra-thin (3.5 mm) rectangular housing.

open

TEL：+86 13600179521
Mail：info@easyautomationparts.com
info@easyautomationparts.com

Parameters

Request a Quote

Return to List

Specifications Parameter Value Sensing method Through-beam type Sensing distance 500 mm Standard sensing object Opaque, 1.3 mm dia. min. Minimum sensing object 1.3 mm min. dia. (Opaque) Directional angle Emitter: 3 to 25°, Receiver: 3° min. Light source Infrared LED (860 nm) Power supply voltage 12 to 24 VDC ±10% ripple (p-p) 10% max. Current consumption Emitter: 10 mA max., Receiver: 20 mA max. Control output NPN open collector, 26.4 VDC max., 50 mA max. Residual voltage 1 V max. (Load current < 10 mA), 2 V max. (Load current 10-50 mA) Operation mode Light-ON Response time Operate or reset: 1 ms max. Protection & Environment Parameter Value Protective circuits Output short-circuit protection, Output reverse polarity protection, Power supply reverse polarity protection Ambient illuminance Incandescent lamp: 5,000 lx max., Sunlight: 10,000 lx max. Ambient temperature (Operating) -25 to 55°C (with no freezing or condensation) Ambient temperature (Storage) -40 to 70°C Ambient humidity (Operating) 35% to 85% Ambient humidity (Storage) 35% to 95% Insulation resistance 20 MΩ min. at 500 VDC Dielectric strength 1000 VAC, 50/60 Hz for 1 min Vibration resistance 10 to 2000 Hz, 1.5 mm or 300 m/s² double amplitude for 0.5 hours each in X, Y, Z directions Shock resistance 1000 m/s², 3 times each in X, Y, Z directions Degree of protection IP67 (IEC)