OMRON Distributor | PLC Servo Sensors Robots Supplier

E3C-S30T Safety Light Curtain | F3SJ Series Industrial Safety Sensor

The E3C-S30T is a sensor head for the E3C series amplifier-separated photoelectric sensor. It utilizes a through-beam (opposed) sensing method and features an ultra-compact, low-profile head design that saves space and allows for close mounting .

open

TEL：+86 13600179521
Mail：info@easyautomationparts.com
info@easyautomationparts.com

Parameters

Request a Quote

Return to List

Technical Specifications Parameter Specification Brand OMRON Model E3C-S30T Series E3C Type Compact Head Separated Photoelectric Sensor (Sensor Head only) Sensing Method Through-beam (Opposed) Sensing Distance 300 mm (11.811") Standard Sensing Object Opaque object, 4-mm diameter min. Light Source Infrared LED (940 nm wavelength) Directional Angle Emitter/Receiver: 3 to 20° each Degree of Protection IP60 (IEC 60529) – Indoor use only Connection Method Pre-wired cable (standard length: 2 m) Material (Case) Polycarbonate Material (Lens) Acrylics Accessories Included Instruction manual, Phillips screw M2×8, spring washer, flat washer, nut M2 Environmental Specifications Parameter Value Ambient Temperature (Operating) -25 to 70°C (with no icing or condensation) Ambient Temperature (Storage) -25 to 70°C (with no icing or condensation) Ambient Humidity (Operating/Storage) 35% to 85% RH (with no condensation) Ambient Illuminance (Receiver) Incandescent lamp: 3,000 lx max. / Sunlight: 10,000 lx max. Insulation Resistance 20 MΩ min. at 500 VDC Dielectric Strength 500 VAC at 50/60 Hz for 1 minute Vibration Resistance (Destruction) 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, Z directions Shock Resistance (Destruction) 500 m/s² for 3 times each in X, Y, Z directions Weight (packed state) Approx. 60 g