Technical Specifications Parameter Specification Brand OMRON Model E2Q6-N20F3-H Series E2Q6 Type Inductive Proximity Sensor Shielding Shielded (flush mountable) Sensing Distance 20 mm ±10% Setting Distance 0 to 16 mm Output Configuration PNP Operation Mode NO + NC (Double output) Standard Sensing Object Iron, 60 x 60 x 1 mm Response Frequency 150 Hz (Average value) Electrical Specifications Parameter Specification Supply Voltage 10 to 30 VDC (including 10% ripple (p-p)) Current Consumption 20 mA max. Load Current (Switching Capacity) 200 mA max. Residual Voltage 2 V max. (at 200 mA load current) Differential Distance (Hysteresis) 15% max. of sensing distance Protective Circuits Output short-circuit protection / Output reverse polarity protection / Power supply reverse polarity protection Environmental & Mechanical Specifications Parameter Specification Degree of Protection IP67 (IEC) Ambient Temperature (Operating) -25 to 70°C Ambient Temperature (Storage) -25 to 70°C Ambient Humidity (Operating) 35% to 95% Vibration Resistance (Destruction) 10 to 55 Hz, 1.5 mm double amplitude for 2 hours each in X, Y, Z directions Shock Resistance (Destruction) 300 m/s², 3 times each in X, Y, Z directions Insulation Resistance 50 MΩ min. (at 500 VDC) between charged parts and case Dielectric Strength 1,000 VAC, 50/60 Hz for 1 min between charged parts and case Temperature Influence ±15% max. of sensing distance at 23°C over -25 to 70°C range Voltage Influence ±2% max. of sensing distance at 24 VDC in the range of 24 VDC ±15% Physical Specifications Parameter Specification Housing Dimensions (W x H x D) 40 x 40 x 118 mm Housing Material Polyamide (Case, Sensing surface, Terminal blocks) Connection Method Terminal block model Indicators Power indicator (green), Detection indicator (yellow) Weight (Main unit) Approx. 230 g Weight (Packaged) Approx. 250 g