Key Specifications Parameter Value Manufacturer Omron Automation and Safety Series E2EH Sensor Type Inductive Proximity Sensor Housing Size M12 Threaded Cylinder Mounting Type Shielded (Flush) Sensing Distance 3 mm ±10% (Setting distance: 0 to 2.4 mm) Output Type DC 2-wire, Polarized Operation Mode Normally Open (NO) Supply Voltage 12 to 24 VDC (Operating range: 10 to 32 VDC) Switching Current (Output Rating) 3 to 100 mA (3 to 50 mA at +100°C to +110°C) Leakage Current 0.8 mA max. Residual Voltage 3 V max. (at 100 mA load current with 2m cable) Response Frequency 500 Hz (Average value) Standard Sensing Object Iron, 12 x 12 x 1 mm Indicator Operation indicator (red), Operation setting indicator (yellow) Environmental & Physical Specifications Parameter Value Ambient Temperature (Operating) 0 to 100 °C (up to 110°C for 1,000 hours) Ambient Temperature (Storage) -25 to 70 °C Ambient Humidity (Operating) 35% to 95% Temperature Influence ±10% max. of sensing distance (0 to 70°C); ±15% max. (70 to 100°C) Voltage Influence ±10% max. of sensing distance at rated voltage ±15% range Insulation Resistance 50 MΩ min. (at 500 VDC) Dielectric Strength 1,000 VAC for 1 minute Vibration Resistance 10 to 55 Hz, 1.5 mm double amplitude, 2 hours each in X, Y, Z directions Shock Resistance 1,000 m/s², 10 times each in X, Y, Z directions Protection Rating IEC: IP67, DIN 40050-9: IP69K Housing Material Stainless steel (SUS316L) Sensing Surface Material Polybutylene terephthalate (PBT) Clamping Nuts Material Stainless steel (SUS316L) Cable Material Heat-resistant PVC cable Connection Method Pre-wired models (2m standard, 5m optional) Weight (Packed) Approx. 80 g