Technical Specifications Parameter Value Product Type Inductive Proximity Sensor (E2EH Series) Brand Omron Automation and Safety Model E2EH-X3C2 (Pre-wired 2M cable version) Sensing Head Size M12 Sensing Distance 3 mm ±10% Setting Distance 0 to 2.4 mm Differential Distance 15% max. of sensing distance Output Type NPN open collector Operation Mode NC (Normally Closed) Switching Capacity 100 mA max. Residual Voltage 2 V max. (Load current 100 mA, 2 m cable) Shielding Shielded (Flush-mountable) Supply Voltage 12 to 24 VDC (ripple 10% max.) Operating Voltage Range 10 to 32 VDC Current Consumption 10 mA max. Response Frequency 500 Hz (Average value) Standard Sensing Object Iron, 12 x 12 x 1 mm Operating Temperature 0 to 100 °C Storage Temperature -25 to 70 °C Operating Humidity 35% to 95% Temperature Influence ±10% max. (0 to 70°C); ±15% max. (70 to 100°C) Voltage Influence ±10% max. at rated voltage ±15% range Insulation Resistance 50 MΩ min. at 500 VDC Dielectric Strength 1,000 VAC 50/60 Hz for 1 min Vibration Resistance 10 to 55 Hz, 1.5 mm double amplitude, 2 hours each in X, Y, Z Shock Resistance 1000 m/s², 10 times each in X, Y, Z Degree of Protection IEC: IP67, DIN40050-9: IP69K Case Material Stainless steel (SUS316L) Sensing Surface Material Polybutylene terephthalate (PBT) Clamping Nut Material Stainless steel (SUS316L) Cable Heat-resistant PVC cable, φ4 Connection Method Pre-wired model (2 m) Indicator Operation indicator (yellow) Protective Circuits Output short-circuit protection, Output reverse polarity protection, Power supply reverse polarity protection, Surge suppressor Weight Approx. 80 g Certifications CE, IEC