Key Specifications Parameter Specification Product Type Inductive Proximity Sensor (Cable Amplifier Type) Sensing Head Size 3 mm diameter (Cylindrical, Shielded) Sensing Distance 0.5 mm ±15% Setting Distance 0 to 0.3 mm Output Configuration DC 3-Wire, NPN - NO (Normally Open) Operation Mode NO (Normally Open) Power Supply Voltage 5 to 24 VDC (Operating range: 4.75 to 30 VDC) Current Consumption 10 mA max. Control Output (Load Current) 100 mA max. (30 VDC max.) Residual Voltage 1 V max. (Load current 100 mA with cable length of 2 m) Response Frequency 1 kHz (Average value) Differential Distance (Hysteresis) 10% max. of sensing distance Standard Sensing Object Iron, 5 x 5 x 1 mm Indicator Detection indicator (Red LED) Protection Circuits Surge suppressor Environmental & Physical Characteristics Parameter Specification Ambient Temperature (Operating) -25 to 70 °C (with no icing or condensation) Ambient Humidity (Operating) 35% to 95% Degree of Protection (IP Rating) IP64 (IEC 60529) - Sensor head only Temperature Influence ±20% max. of sensing distance at 23℃ over the -25 to 70℃ range Voltage Influence ±5% max. of sensing distance at rated voltage range in 4.75 to 30 V Insulation Resistance 50 MΩ min. at 500 VDC (between charged parts and case) Dielectric Strength 500 VAC at 50/60 Hz for 1 minute (between charged parts and case) Vibration Resistance (Destruction) 10 to 55 Hz, 1.5 mm double amplitude for 2 hours each in X, Y, Z directions Shock Resistance (Destruction) 500 m/s², 10 times each in X, Y, Z directions Housing Material Case: Brass (Nickel-plated); Sensing surface: ABS resin Connection Method Pre-wired model (standard cable length 2 m, 3-conductor) Weight (Packaged) Approx. 45 g