Key Specifications Parameter Specification Product Type Inductive Proximity Sensor (Cable Amplifier Type) Sensing Head Size 8 mm diameter (Cylindrical, Shielded) Sensing Distance 3 mm ±10% Setting Distance 0 to 2.1 mm Output Configuration DC 2-Wire Operation Mode NO (Normally Open) Power Supply Voltage 12 to 24 VDC (Operating range: 10 to 30 VDC) Current Consumption 13 mA max. Leakage Current 0.8 mA max. Control Output (Load Current) 5 to 100 mA Response Frequency 1 kHz (Average value) Differential Distance (Hysteresis) 10% max. of sensing distance Standard Sensing Object Iron, 8 x 8 x 1 mm Sensing Object Ferrous metal (Sensitivity lowers with non-ferrous metals) Indicator Operation indicator (Red), Operation setting indicator (Green) Protective Circuits Output short-circuit protection, Surge suppressor Environmental & Physical Characteristics Parameter Specification Ambient Temperature (Operating) -25 to 70 °C (with no icing or condensation) Ambient Humidity (Operating) 35% to 95% Degree of Protection (IP Rating) IP67 (IEC 60529) - Sensor head only Oil-proof Yes (Sensor head only, per Omron internal standards) Temperature Influence ±20% max. of sensing distance at 23℃ over -25 to 70℃ range Voltage Influence ±1% max. of sensing distance at rated voltage in rated voltage ±15% range Insulation Resistance 50 MΩ min. at 500 VDC (between charged parts and case) Dielectric Strength 1,000 VAC at 50/60 Hz for 1 minute (between charged parts and case) Vibration Resistance (Destruction) 10 to 55 Hz, 1.5 mm double amplitude, 2 hours each in X, Y, Z directions Shock Resistance (Destruction) 1,000 m/s², 10 times each in X, Y, Z directions Housing Material Case: Brass (Nickel-plated); Sensing surface: ABS resin Connection Method Pre-wired model (2 m cable standard) Dimensions (Head) 18 mm length x 8 mm diameter Weight Approx. 45 g