Technical Specifications Parameter Value Product Type Inductive Proximity Sensor (Amplifier-relay type / Separate amplifier) Brand Omron Automation and Safety Model E2EC-C1R5D2 Sensing Head Diameter 5.4 mm Sensing Distance 1.5 mm ±10% Setting Distance 0 to 1.05 mm Output Type DC 2-Wire Operation Mode NC (Normally Closed) Shielding Shielded (Shield type) Supply Voltage 12 to 24 VDC (operating range: 10 to 30 VDC) Control Output (Switching Capacity) 5 to 100 mA Leakage Current 0.8 mA max. Residual Voltage 3 V max. (at load current 100 mA, 2 m cable) Response Frequency 1.5 kHz (average value) Differential Distance 10% max. of sensing distance Standard Sensing Object Iron, 5 x 5 x 1 mm Detectable Object Ferrous metal (sensing distance decreases with non-ferrous metals) Indicator LED (Operation indicator - red) Operating Temperature -25°C to 70°C (with no icing or condensation) Operating Humidity 35% to 95% (with no condensation) Temperature Influence ±20% max. of sensing distance at 23°C over -25 to 70°C range Voltage Influence ±2.5% max. of sensing distance at rated voltage within ±15% range Insulation Resistance 50 MΩ min. at 500 VDC (between charged parts and case) Dielectric Strength 1,000 VAC 50/60 Hz for 1 min (between charged parts and case) Vibration Resistance 10 to 55 Hz, 1.5 mm double amplitude, 2 hours each in X, Y, Z directions Shock Resistance 1,000 m/s², 10 times each in X, Y, Z directions Ingress Protection IP67 (IEC) - Sensor head only Protective Circuits Output short-circuit protection, Surge suppressor Connection Method Pre-wired (Cable leads) Standard Cable Length 2 m (5 m and 0.3 m versions also available) Cable Specifications Flexible shielded cord, PVC insulated, 2-core Case Material (Sensor Head) Brass (Nickel-plated) Sensing Surface Material ABS Head Size Depth 18 mm Width 8 mm Length 465 mm (total cable length specification may vary) Unit Weight Approx. 45 g (packaged) Certifications CE, IEC