Key Specifications Parameter Specification Brand OMRON Model E2E-X7D1-M1GJ Series E2E (Standard) Sensor Type Inductive proximity sensor Sensing Distance 7 mm ±10% Setting Distance 0 to 5.6 mm Output Type DC 2-wire, NPN-NO (Normally Open) Switching Capacity 3 to 100 mA Leakage Current 0.8 mA max. Residual Voltage 3 V max. (load current 100 mA, with 2 m cable) Housing Size M18 Shielding Shielded (flush mountable) Housing Material Nickel-plated brass Sensing Surface Material PBT (Polybutylene terephthalate) Connection Method M12 connector (metal inline connector type) Protection Rating IP67 (IEC) Supply Voltage 10 to 30 VDC (ripple p-p 10% included) Electrical & Operating Ratings Parameter Specification Response Frequency 500 Hz Differential distance (Hysteresis) 10% max. of sensing distance Sensing object Ferrous metal (non-ferrous metal reduces sensing distance) Standard sensing object Iron, 18 x 18 x 1 mm Operating temperature -25°C to 70°C (no icing) Storage temperature -40°C to 85°C (no icing) Operating humidity 35% to 95% (no condensation) Temperature influence ±10% max. of sensing distance at 23°C over -25°C to 70°C range Voltage influence ±1% max. of sensing distance at rated voltage ±15% range Insulation resistance 50 MΩ min. at 500 VDC (between charged parts and case) Dielectric strength 1,000 VAC 50/60 Hz for 1 min Environmental & Physical Ratings Parameter Specification Vibration resistance 10 to 55 Hz, 1.5 mm double amplitude, 2h each in X, Y, Z directions Shock resistance 1,000 m/s², 10 times each in X, Y, Z directions Indicator Operation indicator (red), setting indicator (green) Protective circuits Surge absorption, load short circuit protection Weight (connector type) Approx. 40 g