Technical Specifications Parameter Value Product Type Inductive Proximity Sensor (E2E NEXT Series) Brand Omron Automation and Safety Model E2E-X10MB3D18-M1 Size / Thread M18 Sensing Distance 10 mm (0.394") ±10% Setting Distance 0 to 8 mm Mounting Type Unshielded (Non-flush) Output Type PNP - NO + NC (Normally Open + Normally Closed), 3-Wire Supply Voltage 10 to 30 VDC (Class 2) Current Consumption 20 mA max. Load Current 100 mA max. Residual Voltage 2 V max. (at load current 100 mA, 2 m cable) Response Frequency 400 Hz Standard Sensing Object Iron, 30 x 30 x 1 mm Detectable Object Ferrous metal (sensing distance decreases with non-ferrous metal) Differential Distance 10% max. of sensing distance Operating Temperature -40°C to 85°C (with no icing or condensation) UL temperature rating: -25°C to 70°C Storage Temperature -40°C to 85°C Operating Humidity 35% to 95% Temperature Influence ±15% max. (-40 to 85°C range); ±10% max. (-25 to 70°C range) Voltage Influence ±1% max. at rated voltage ±15% range Insulation Resistance 50 MΩ min. at 500 VDC Dielectric Strength 1,000 VAC 50/60 Hz for 1 minute Vibration Resistance 10 to 55 Hz, 1.5 mm double amplitude, 2 hours each in X, Y, Z directions Shock Resistance 1,000 m/s², 10 times each in X, Y, Z directions Degree of Protection IP67, IP67G (JIS C0920 Appendix 1), IP69K (ISO 20653) IO-Link COM2 (Ver 1.1), Baud rate: 38.4 kB/s PD Size: 2 bytes, OD Size: 1 byte Minimum Cycle Time: 2.3 ms Indicator Operation indicator (orange) Body Material Nickel-plated brass Sensing Surface Material Polybutylene Terephthalate (PBT) Clamping Nut Material Nickel-plated brass Toothed Washer Material Iron zinc plating Connection Method M12 4-Pin Connector Thread Length 28 mm Overall Length 53 mm Thread Size M18 Weight (approx.) 85 - 105 g