Key Specifications Parameter Specification Product Type Inductive Proximity Sensor (Small-diameter) Sensing Distance 1.2 mm ±10% (0.047") Setting Distance 0 to 0.84 mm Housing Size M5 (Threaded Cylindrical) Shielding Shielded (Flush mountable) Output Configuration NPN - NO (Normally Open), 3-Wire Connection Method Pre-wired PVC cable, 2 m length (suffix -2) Cable Specification PVC (oil-resistant) Power Supply Voltage 10 to 30 VDC Current Consumption 10 mA max. Control Output (Load Current) 100 mA max. Response Frequency 4 kHz Differential Distance (Hysteresis) 15% max. of sensing distance Standard Sensing Object Iron, 4 x 4 x 1 mm Indicator Operation indicator (Yellow LED) - lights during output Environmental & Physical Characteristics Parameter Specification Ambient Temperature (Operating) -25 to 70 °C (with no icing or condensation) Ambient Humidity (Operating) 35% to 95% (with no condensation) Degree of Protection (IP Rating) IP67 (IEC 60529) Oil-proof Yes (per Omron internal standards) Temperature Influence ±15% max. of sensing distance at 23°C over -25 to 70°C range Voltage Influence ±2.5% max. of sensing distance in rated voltage ±15% range Insulation Resistance 50 MΩ min. at 500 VDC Dielectric Strength 500 VAC at 50/60 Hz for 1 minute Vibration Resistance (Destruction) 10 to 55 Hz, 1.5 mm double amplitude, 2 hours each in X, Y, Z directions Shock Resistance (Destruction) 500 m/s², 10 times each in X, Y, Z directions Housing Material Case: Stainless steel (SUS303) Sensing Surface Material Heat-resistant ABS resin Cable Length 2 meters Overall Length 25.1 mm Weight Approx. 35 g