Key Specifications Parameter Value Manufacturer Omron Automation and Safety Series E2E Product Type Inductive Proximity Sensor Housing Size 3 mm diameter cylindrical Mounting Type Shielded (Flush) Sensing Distance 0.8 mm ±10% Setting Distance 0 to 0.56 mm Differential Travel (Hysteresis) 15% max. of sensing distance Output Type PNP Open Collector Operation Mode Normally Open (NO) Standard Sensing Object Iron, 3 x 3 x 1 mm Response Frequency 5 kHz Supply Voltage 10 to 30 VDC (including 10% ripple (p-p)) Current Consumption 10 mA max. Output Switching Current 50 mA max. Residual Voltage 2 V max. (Load current 50 mA with 2m cable) Protection Circuits Output short-circuit protection, Output reverse polarity protection, Power supply reverse polarity protection, Surge suppressor Indicator Yellow LED (Operation indicator) Environmental & Physical Specifications Parameter Value Ambient Temperature (Operating) -25°C to 70°C Ambient Humidity (Operating) 35% to 95% Temperature Influence ±15% max. of sensing distance at 23°C in range -25°C to 70°C Voltage Influence ±2.5% max. of sensing distance at rated voltage ±15% range Insulation Resistance 50 MΩ min. (at 500 VDC) between charged parts and case Dielectric Strength 500 VAC, 50/60 Hz for 1 minute Vibration Resistance 10 to 55 Hz, 1.5 mm double amplitude, 2 hours each in X, Y, Z Shock Resistance 500 m/s², 10 times each in X, Y, Z Protection Rating IP67 (IEC) Connection Method Pre-wired M8 connector Cable Length 0.3 m Housing Material SUS303 Stainless Steel Sensing Surface Material Heat-resistant ABS resin Cable Material PVC Weight (Packed) Approx. 20 g