Specifications Specification Category Parameter / Value General Series D2SW-01 Actuator Type Simulated Roller Lever (Hinge Roller Lever) Contact Configuration SPDT (Single Pole Double Throw) / 1c Contact Material Gold Alloy (Crossbar construction) Terminal Type Pre-wired leads (Lead Wire type) Lead Wire Length 300 mm (0.3 m) Degree of Protection IP67 (IEC 60529) – Dust-tight and waterproof Ratings Rated Current (Resistive Load) 0.1 A (100 mA) Rated Voltage 125 VAC / 30 VDC Minimum Applicable Load (Reference) 5 VDC, 1 mA Inrush Current (Max) NO: 1A max, NC: 1A max Mechanical Characteristics Operating Force (OF) 0.59 N max. (approx. 60 gf) Release Force (RF) 0.06 N min. Pre-travel (PT) - Over-travel (OT) 1.0 mm min. Movement Differential (MD) 0.8 mm max. Operating Position (OP) 10.7 ± 0.8 mm Free Position (FP) 15.5 mm max. Performance & Durability Mechanical Life 5,000,000 operations min. Electrical Life (Rated Load) 200,000 operations min. Operating Speed 0.1 mm to 1 m/s (pin plunger) Operating Frequency (Mechanical) 300 operations/minute max. Operating Frequency (Electrical) 30 operations/minute max. Environmental & Physical Ambient Operating Temperature -40 to 85 °C (with no icing) Ambient Operating Humidity 95% max. (at 5°C to 35°C) Vibration Resistance (Malfunction) 10 to 55 Hz, 1.5 mm double amplitude Shock Resistance (Destruction) 1,000 m/s² (approx. 100G) max. Shock Resistance (Malfunction) 300 m/s² (approx. 30G) max. Insulation Resistance 100 MΩ min. (at 500 VDC) Dielectric Strength (Between same polarity terminals) 600 VAC, 50/60 Hz for 1 min Dielectric Strength (Between current-carrying parts and ground) 1,500 VAC, 50/60 Hz for 1 min Contact Resistance (Initial) 70 mΩ max. (for lead wire models) Weight Approx. 10 g