Products
Products
ABB Allen-Bradley ADEPT ALSTOM
All Categories
AMAT B&R BACHMANN BENTLY Bosch Rexroth BAILEY CUTLER-HAMMER DEIF DANAHER Enterasys Extreme EATON ELAU EMERSON EPRO FANUC servo motor FOXBORO GE HIMA Honeywell ICSTriplex IFM Kollmorgen SIEMENS Schneider WOODWARD YASKAWA Omron YOKOGAWA MOOG MOTOROLA NI RELIANCE Rexroth SEW-EURODRIVE TRICONEX Weidmueller Mitsubishi SICK FISHER
home
abb
1SDA067047R1
The ABB 1SDA067047R1 is a three‑pole molded case circuit breaker (MCCB) from the ABB Tmax XT2N series with a magnetic (MF) trip mechanism. It is designed for fixed installation with front terminals and provides dependable short‑circuit protection for low‑voltage power distribution systems. With a rated current of 8.5 A and robust construction, this breaker is suitable for industrial and commercial electrical circuits requiring reliable overcurrent interruption and fault protection.

More details >> Request a Quote >>
abb
1SDA067045R1
The ABB 1SDA067045R1 is a three‑pole molded case circuit breaker (MCCB) from the Tmax XT2N series with a magnetic (MF) release. Designed for low‑voltage power distribution, it provides protection against overcurrent and short-circuit conditions. It features front bolt terminals for easy installation and fast response to fault currents, making it suitable for motor feeder protection and general circuit protection in industrial and commercial environments.

More details >> Request a Quote >>
abb
A26D-30-10 380V
The ABB A26‑30‑10 380V AC Contactor is a three‑pole industrial AC power contactor designed for robust control and switching of three‑phase electrical power circuits. It is part of ABB’s A26 series of contactors, widely used for motor control, power distribution switching, lighting circuits, and general industrial loads. This contactor features three main normally open (NO) contacts with a built‑in auxiliary contact for control and feedback functions. The contactor is operated by an AC control coil rated for 380–400 V (50 Hz) / 400–415 V (60 Hz), providing reliable actuation in high‑voltage control systems. Its compact block‑type design with screw terminals enables easy panel or DIN‑rail installation. A variety of add‑on accessories (such as auxiliary blocks and mechanical latches) can be integrated for expanded control and signaling needs

More details >> Request a Quote >>
abb
A12D-30-01 220V
The ABB A12‑30‑01 220 V Contactor is a three‑pole AC power contactor designed for industrial and commercial control of three‑phase power circuits, including motor switching, lighting, and general load control. It features three main normally‑open (NO) contacts and one auxiliary contact, making it suitable for control feedback or interlock functions. The contactor uses an AC control coil rated for 220 – 230 V (50 Hz) or 230 – 240 V (60 Hz) for reliable operation and is built to meet international IEC standards for industrial contactor performance. It is compatible with DIN‑rail or panel mounting with screw‑type terminals for robust and secure connections.

More details >> Request a Quote >>
abb
1SDA038676R1
The ABB 1SDA038676R1 is a three‑pole molded case circuit breaker (MCCB) from ABB’s SACE Isomax S5 series, configured with a PR212‑P electronic trip unit with LSI (Long‑Time, Short‑Time, and Instantaneous) protection and a 630 A rated current. This breaker provides selectable protection against overloads, short circuits, and instantaneous faults in three‑phase low‑voltage power distribution systems. The device features a fixed mounting with front connections and is designed for reliable circuit protection and coordination in industrial and commercial electrical installations.

More details >> Request a Quote >>
abb
AX09-30-01-81
The ABB AX09‑30‑01‑81 is a three‑pole AC contactor from ABB’s AX series designed for control and switching of three‑phase power circuits. It is suitable for industrial and commercial applications where reliable and compact switching of motors and general loads is required. The contactor is operated by a 24 V AC control coil (50/60 Hz) and features three main normally open (NO) contacts along with one built‑in auxiliary normally closed (NC) contact for control feedback or interlock applications. Its block‑type design provides robust performance up to 690 V AC and is compatible with DIN‑rail or panel installations.

More details >> Request a Quote >>
abb
1SDA092548R1
The ABB 1SDA092548R1 is a 4‑pole molded case circuit breaker (MCCB) designed for reliable overcurrent protection in electrical distribution systems. It combines a thermomagnetic trip mechanism with a plastic enclosure, offering compact yet robust protection against overloads and short‑circuits. This breaker is suitable for use in commercial, industrial, and panel applications requiring dependable four‑pole protection and safety. Model designation S2N160 R160 4P FFC+RC212V indicates a 160 A rated breaker with specific release and accessory configurations for enhanced reliability and performance.

More details >> Request a Quote >>
abb
2CDS251001R0634
The ABB 2CDS251001R0634 is a single‑pole, type C miniature circuit breaker from ABB’s System pro M compact S200 series. This compact overcurrent protection device is designed for the protection of electrical circuits against overloads and short‑circuits in residential, commercial, and light industrial installations. It features a thermal‑magnetic tripping mechanism that reacts to sustained overloads and instantaneous short‑circuit currents, offering reliable performance and safety in low‑voltage AC and DC applications. The breaker can also accommodate auxiliary accessories such as signalling contacts for enhanced monitoring.

More details >> Request a Quote >>
abb
AL26-30-10 DC24V
The ABB AL26‑30‑10 24 V DC Contactor is a compact three‑pole power contactor designed for control and switching of three‑phase electrical power circuits. It features three main normally open (NO) contacts and one normally open auxiliary contact for control feedback. The contactor uses a 24 V DC coil with low consumption, making it suitable for direct control by PLC outputs or DC control systems. It is engineered for robust operation in industrial environments and is ideal for motor control, power switching, lighting, and general load control up to 690 V AC. The device complies with IEC standards for contactors and supports high switching frequencies with reliable mechanical performance.

More details >> Request a Quote >>
abb
1SBL323001R8810
ABB 1SBL323001R8810 (AL40‑30‑10 220 V DC Contactor) The ABB 1SBL323001R8810 is a three‑pole DC‑operated contactor from the AL series, designed for industrial motor and power circuit control. It features three main normally‑open contacts (3 NO) and one auxiliary normally‑open contact (1 NO), with a 220 V DC coil for reliable switching in DC control applications. The low‑power DC coil enables direct driving from PLC outputs, and the contactor is suitable for use in three‑phase power circuits up to 690 V AC. Its block contactor design provides robust switching performance in motor control, lighting, and general industrial power applications.

More details >> Request a Quote >>
1 2
···
93 94 95 96 97 98 99
···
1476 1477
Related products
Honeywell CC-TDIL01 Digital Input Module - Advanced Control Solutions -

The Honeywell CC-TDIL01 Digital Input Module is designed for precise and reliable digital signal acquisition in industrial control systems. Ideal for applications requiring high accuracy and durability.
SC520 ABB Communication Modules - Advanced Control Solutions for Industrial Automation -

The ABB SC520 Communication Modules are advanced industrial control components designed to facilitate seamless communication between different parts of an industrial system. These modules are crucial for enhancing operational efficiency, enabling real-time data exchange, and ensuring reliable performance across various industrial settings.
FISHER™ 3582
Key Parameters & Specifications Parameter / Feature Category Description Product Name Fisher™ 3582 Pneumatic Valve Positioner Type Force-Balance, Cam and Lever, Pneumatic (I/P) Primary Application Positioning of rotary valves (ball, butterfly, plug) with piston actuators. Input Signal Standard: 3-15 psig (0.2-1.0 bar). Other input ranges (e.g., 6-30 psig) are available. Supply Pressure Up to 150 psig (10.3 bar). Output to Actuator Supply pressure dependent. Controls air to one or both sides of a piston actuator. Air Flow Capacity Very High. The large-volume relay is designed to quickly fill and exhaust the chambers of piston actuators. Typical exhaust capacity is >3.0 SCFM (85 slpm). Action Field-reversible between direct and reverse action. Feedback Mechanism Cam and Lever. Standard cams provide Linear or Equal Percentage flow characteristics. Actuator Compatibility Piston Actuators: • Double-acting (Primary use) • Single-acting (Spring-return) Mounting Direct-mounted to the actuator. Connects to the valve shaft via a feedback lever and link. Enclosure Weatherproof and corrosion-resistant aluminum enclosure. Approvals Suitable for use in hazardous areas due to its purely pneumatic design. Typically has FM, CSA, and ATEX certifications.