ABB Distributor | Electrical Drives Motors Robotics Automation Supplier

abb

AX09-30-10

The ABB AX09‑30‑10 is a compact AC contactor that provides reliable switching of three‑phase circuits in industrial and commercial electrical systems. It has three normally open main contacts and a built‑in auxiliary contact for control‑logic or feedback purposes. This contactor is suitable for motor control (AC‑3 category), lighting, and general power switching up to 690 V AC system voltage. Depending on the coil version, it can be operated on various control voltages (e.g., 24 V AC, 110–120 V AC, 220–240 V AC).

More details >> Request a Quote >>

abb

A12D-30-10

The ABB A12‑30‑10 is an electromechanical AC contactor designed for controlling three‑phase motors and power loads. It uses a coil (specified by voltage) to electrically actuate the main contacts, enabling reliable switching of power circuits up to low‑voltage distribution levels. The compact block‑type design makes it suitable for DIN‑rail or panel installations, and the contactor can be used with auxiliary contacts and overload relays to form full motor starter units.

More details >> Request a Quote >>

abb

AF40-30-00-13

The ABB AF40‑30‑00‑13 is a 3‑pole IEC contactor from ABB’s AF40 series designed for switching and control of three‑phase power circuits such as motors and general loads. It features an AC/DC operated coil that accepts a wide control voltage range, built‑in surge protection, and a compact block‑type design suitable for industrial control panels.

More details >> Request a Quote >>

abb

AF65-30-00-11

The ABB AF65‑30‑00‑11 is a three‑pole AC contactor from ABB’s AF Series designed for switching and controlling three‑phase power circuits such as motors, resistive loads, and slightly inductive loads. It features a robust design with built‑in surge protection and supports a wide range of control voltages without changing coils, making it suitable for diverse applications worldwide.

More details >> Request a Quote >>

abb

T6H 630 PR221DS-I R630 F F 3P

The ABB T6H 630 PR221DS‑I is a fixed‑type molded case circuit breaker designed for industrial and commercial electrical power distribution. It combines a robust breaker frame with a PR221DS‑I electronic trip unit that offers reliable protection and adjustable settings for overload, short‑time and instantaneous fault conditions. The breaker is suitable for protecting feeders, motors, and distribution circuits up to 630 A and is engineered to meet IEC standards for safety and performance. It features front‑mounted bolt‑on connections for easy installation.

More details >> Request a Quote >>

abb

MOD600ADI8MH

The ABB MOD600ADI8MH is a digital input interface module designed to work with ABB’s remote I/O and modular automation platforms (often under the RIO600/Remote I/O family). It provides a set of discrete digital inputs that allow a controller, protection relay, or automation system to read the status of multiple binary field signals such as switches, contacts, alarms, or sensor outputs.

More details >> Request a Quote >>

abb

OFAF000H80

The ABB OFAF000H80 is a high rupturing capacity fuse intended for use in low‑voltage power distribution and protection systems. It protects electrical circuits by interrupting fault currents and isolating damaged sections. The fuse is rated for both AC and DC applications and offers reliable performance with low power loss at rated current. Compact and standardized for NH000 fuse holders, it fits DIN‑rail systems and panel installations commonly found in industrial and commercial environments

More details >> Request a Quote >>

abb

GCE7007102R0102

ABB GCE7007102R0102 is an Electronic Interface and Power Supply Module for ABB's S800 I/O system, specifically designed as a remote I/O station interface.It serves as the "head module" or "communication module" for a standalone S800 Remote I/O Station. It connects the station to a higher-level controller (like an AC800M, AC500, or third-party PLC) via a fieldbus communication module (e.g., a CI873 PROFIBUS module) and provides regulated power and the internal bus for all I/O modules mounted in the same station.

More details >> Request a Quote >>

abb

AF09-40-00-13

The ABB AF09‑40‑00‑13 is an IEC‑rated AC contactor from ABB’s AF09 series, designed for motor control and power switching in industrial and commercial applications. It is a non‑reversing four‑pole contactor with a rugged design suitable for controlling three‑phase motors, resistive loads, and general switching tasks.

More details >> Request a Quote >>

abb

CP1-10B-10

The ABB CP1‑10B‑10 is a compact, non‑illuminated panel‑mount pushbutton switch designed for industrial and commercial control panels. It is part of ABB’s CP Series of compact pushbutton devices and is typically used for control actions such as start/stop, reset, acknowledge, or other momentary operator inputs.

More details >> Request a Quote >>