Industrial Automation Products | Easy Semiconductor Technology (Hong Kong) Limited

Schneider

EZD 4P 160E 100A

The Schneider Electric EZD is a compact and economical 4-Pole, 100A Moulded Case Circuit Breaker (MCCB). The designation "160E" indicates the frame size (EZD160) and the standard "E" breaking capacity.

More details >> Request a Quote >>

Schneider

PRD 40 3P+N 40KA

The Schneider Electric PRD 40 is a Type 1+2 Combined Surge Protective Device (SPD) with a 3P+N (3-phase + neutral) configuration and an enhanced maximum discharge current (Imax) of 40 kA per phase. Designed for high-risk exposure environments, it provides the highest level of primary surge protection at the service entrance against direct or indirect lightning strikes and severe switching transients in low-voltage AC power systems.

More details >> Request a Quote >>

Schneider

PRD 3P+N 20KA

The Schneider Electric PRD is a Type 1+2 Combined Surge Protective Device (SPD) with a 3P+N (3-phase + neutral) configuration and a maximum discharge current (Imax) of 20 kA per phase. Designed for installation at the service entrance or main distribution board, it provides the first and main line of defense against direct or indirect lightning strikes and large switching transients in low-voltage AC power systems.

More details >> Request a Quote >>

Schneider

EZD 4P 400E

The Schneider Electric EZD is a compact and economical 4-Pole, 400A Moulded Case Circuit Breaker (MCCB). Designed for simplicity and reliable protection in three-phase distribution systems, it provides essential defense against overloads and short-circuits.

More details >> Request a Quote >>

Schneider

ABL8 RPM24200

The Schneider Electric ABL8 RPM24200 is a programmable digital power meter from the PowerLogic PM800 series. This compact, DIN-rail mounted device is designed for accurate measurement, monitoring, and basic power quality analysis of single-phase or three-phase electrical systems.

More details >> Request a Quote >>

Schneider

LC1F500M7C

The Schneider Electric LC1F500M7C is a heavy-duty industrial contactor from the Tesys F range. It is designed for reliable switching and control of large three-phase motor loads or high-current resistive loads.

More details >> Request a Quote >>

Schneider

IC65N 2P D6A

The Schneider Electric iC65N is a standard-breaking capacity, 2-Pole, 6A Miniature Circuit Breaker (MCB) with a Type D tripping characteristic. Part of the widely used Acti 9 iC60 series, it is designed to protect circuits with very high inrush currents against overloads and short-circuits.

More details >> Request a Quote >>

Schneider

NSC 3P 630K 630A

The Schneider Electric NSC is a high-performance, compact Air Circuit Breaker (ACB) from the Masterpact series. The model NSC630K refers to the 630A frame size with a K-type breaking capacity and a 3-pole configuration.

More details >> Request a Quote >>

Schneider

ISCB2 20N2 4P

The Schneider Electric iSCB2 is a compact and intelligent 4-Pole (4P) Earth Leakage Circuit Breaker (ELCB) / Residual Current Circuit Breaker (RCCB) from the Acti 9 range. The designation "20N2" indicates it has a 20A rated current and is a double-pole (2-module) device with a N (Neutral) pole that is also protected and switched.

More details >> Request a Quote >>

Schneider

NSX 4P100/160

The Schneider Electric Compact NSX is a versatile 4-Pole Moulded Case Circuit Breaker (MCCB) equipped with an adjustable electronic trip unit. The key feature of this model is its wide adjustable current range of 100A to 160A, accommodated within a single frame (NSX160 or NSX100, typically NSX160 frame for this range).

More details >> Request a Quote >>