Key Specifications Parameter Specification Manufacturer OMRON Automation and Safety Series TL-N Sensor Type Inductive Proximity Sensor (Rectangular, Built-in Amplifier) Shielding Unshielded (Non-shielded) Sensing Distance 7 mm ±10% Setting Distance 0 to 5.6 mm Differential Distance 10% max. of sensing distance Sensing Object Ferrous metal (sensitivity reduced with non-ferrous metals) Standard Sensing Object Iron, 30 × 30 × 1 mm Output Configuration DC 2-wire Operation Mode NC (Normally Closed) Response Frequency 500 Hz (average value) Supply Voltage 12 to 24 VDC Operating Voltage Range 10 to 30 VDC (including ripple 10% p-p max.) Leakage Current 0.8 mA max. Switching Capacity (Load Current) 3 to 100 mA Residual Voltage 3.3 V max. (at 100 mA load current with 2 m cable) Indicator Red LED (Operation indicator) Protective Circuits Output short-circuit protection, Surge suppressor Operating/Storage Temperature -25 to 70 °C (with no icing or condensation) Operating/Storage Humidity 35% to 95% (with no condensation) Temperature Influence ±10% max. of sensing distance at 23°C over -25 to 70°C range Voltage Influence ±2.5% max. of sensing distance at rated voltage within rated voltage ±15% range Insulation Resistance 50 MΩ min. at 500 VDC (between charged parts and case) Dielectric Strength 1,000 VAC, 50/60 Hz for 1 min (between charged parts and case) Vibration Resistance (Destruction) 10 to 55 Hz, 1.5 mm double amplitude, 2 hours each in X, Y, Z directions Shock Resistance (Destruction) 1,000 m/s², 10 times each in X, Y, Z directions Degree of Protection IP67 (IEC) / Oil-proof Connection Method Pre-wired (2 m cable) Material (Case/Sensing Surface) Heat-resistant ABS resin Cable Specifications Vinyl (PVC)-insulated round cord Weight (Packaged) Approx. 145 to 165 g