Specifications General & Performance Parameter Value Series E3S-A Appearance Horizontal (square type) Sensing method Diffuse-reflective Sensing distance White paper (100 x 100 mm): 10 to 200 mm Differential distance 10% max. of sensing distance Light source Red LED (660 nm) Light source (variant) Red (700 nm) Electrical Specifications Parameter Value Power supply voltage 10 to 30 VDC (ripple p-p 10% included) Current consumption 30 mA max. Control output NPN open collector Output current 100 mA max. Output voltage 30 VDC max. Residual voltage 1 V max. Operation mode Light-ON / Dark-ON selectable Response time Operate or reset: 0.5 ms max. Protective Circuits & Adjustment Parameter Value Protective circuits Output short-circuit protection, Power supply reverse polarity protection Sensitivity setting 2-turn endless adjustment (with indicator) Timer function Not available on E3S-AD11 (available on E3S-AD2x models) Indicators Parameter Value Light indicator Red (lights when output is ON) Stability indicator Green Environmental Specifications Parameter Value Ambient illumination (incandescent) 5,000 lx max. Ambient illumination (sunlight) 10,000 lx max. Ambient temperature (Operating) -25 to 55°C (with no freezing or condensation) Ambient temperature (Storage) -40 to 70°C Ambient humidity (Operating) 35% to 85% (with no condensation) Ambient humidity (Storage) 35% to 95% Degree of protection IP67 (IEC), NEMA 4X (indoors only) Insulation & Dielectric Strength Parameter Value Insulation resistance 20 MΩ min. (500 VDC megger) Dielectric strength 1000 VAC 50/60 Hz for 1 min Vibration resistance (Destruction) 10 to 55 Hz, 1.5 mm double amplitude, 2 h each in X, Y, Z directions Shock resistance (Destruction) 500 m/s², 3 times each in X, Y, Z directions Physical Specifications Parameter Value Connection method Pre-wired (2 m cable) Alternative connection E3S-AD11-M1J: M12 connector (0.3 m cable) Number of conductors 3 Weight Approx. 59.5 g Case material Polybutylene terephthalate (PBT) Lens material Denatured Polyarylate Mounting bracket material Stainless steel (SUS304) Dimensions (H x W x D) 22.3 x 12.4 x 40 mm approx.