E2E-X1R5F2-Z Safety Light Curtain | F3SJ Series Industrial Safety Sensor

The E2E-X1R5F2-Z is a shielded (flush mountable) inductive proximity sensor from Omron's E2E series. With an M8 stainless steel housing, this sensor is designed for installation in tight spaces where it can be embedded directly into metal without performance degradation .

open

TEL：+86 13600179521
Mail：info@easyautomationparts.com
info@easyautomationparts.com

Parameters

Request a Quote

Return to List

Specifications Parameter Value Sensing head size M8 Type Cylindrical, Shielded (Flush mountable) Sensing distance 1.5 mm ±10% Set distance 0 to 1.2 mm Differential travel (Hysteresis) 10% max. of sensing distance Detectable object Magnetic metal (Sensing distance decreases with non-ferrous metal) Standard sensing object Iron, 8 x 8 x 1 mm Response frequency 2 kHz Power source DC 3-wire models Electrical Specifications (PNP Output) Parameter Value Power supply voltage (rated) 12 to 24 VDC (ripple p-p 10% max.) Operating voltage range 10 to 40 VDC Current consumption 13 mA max. Control output (Load current) 200 mA max. Residual voltage 2 V max. (at 200 mA load current, 2m cable) Operation mode NC (Normally Closed) – Output opens when metal is detected Output type PNP open collector Protective circuits Reverse polarity protection, Surge suppressor, Load short-circuit protection Indicators Parameter Value Operation indicator Red LED (lights when output is ON) Environmental Specifications Parameter Value Ambient temperature (Operating) -40 to 85°C (with no icing or condensation) Ambient temperature (Storage) -40 to 85°C Ambient humidity (Operating/Storage) 35% to 95% RH (with no condensation) Temperature influence ±15% max. of sensing distance over -40 to 85°C range (based on 23°C) Voltage influence ±1% max. of sensing distance within rated voltage range ±15% Degree of protection IP67 (IEC 60529) Oil resistance Yes