E2E-X20MD1-Z Safety Light Curtain | F3SJ Series Industrial Safety Sensor

The E2E-X20MD1-Z is a standard inductive proximity sensor from Omron's E2E series. It features a rugged M30 brass nickel-plated housing with an unshielded (non-shielded) design, allowing for a 20mm sensing distance .

open

TEL：+86 13600179521
Mail：info@easyautomationparts.com
info@easyautomationparts.com

Parameters

Request a Quote

Return to List

Specifications Parameter Value Sensing head size M30 Type Cylinder type, Unshielded (Non-shielded) Sensing distance 20 mm ±10% Setting distance 0 to 16 mm Differential distance (Hysteresis) 10% max. of sensing distance Sensing object Ferrous metal (Sensitivity lowers with non-ferrous metals) Standard sensing object Iron, 54 x 54 x 1 mm Response frequency 0.1 kHz (100 Hz) Power source DC 2-wire models Electrical Specifications Parameter Value Power supply voltage (rated) 12 to 24 VDC (ripple p-p 10% max.) Operating voltage range 10 to 30 VDC Control output (Switching capacity) 3 to 100 mA Leakage current 0.8 mA max. Residual voltage - Operation mode NO (Normally Open) Protective circuits Output short-circuit protection, Surge suppressor Note: As a DC 2-wire sensor, the E2E-X20MD1-Z connects in series with the load. When the sensor is OFF, a small leakage current (0.8 mA) flows through the load . Indicators Parameter Value Operation indicator Red LED Operation setting indicator Green LED Environmental Specifications Parameter Value Ambient temperature (Operating) -25 to 70°C (with no icing) Ambient temperature (Storage) -40 to 85°C Ambient humidity (Operating) 35% to 95% RH (with no condensation) Ambient humidity (Storage) 35% to 95% RH Temperature influence ±10% max. of sensing distance over -25 to +70°C range (based on 23°C) Voltage influence ±1% max. of sensing distance within rated voltage range ±15% Degree of protection IP67 (IEC)