E2F-X1R5E2 Safety Light Curtain | F3SJ Series Industrial Safety Sensor

The E2F-X1R5E2 is a resin-case inductive proximity sensor featuring an M8 threaded cylindrical body with a shielded (flush-mountable) design, allowing it to be embedded directly into metal without performance degradation.

open

TEL：+86 13600179521
Mail：info@easyautomationparts.com
info@easyautomationparts.com

Parameters

Request a Quote

Return to List

Specifications Parameter Value Sensing head size M8 Type Cylinder type (with screw), Shielded Sensing distance 1.5 mm ±10% Setting distance 0 to 1.2 mm Differential distance (Hysteresis) 10% max. of sensing distance Standard sensing object Iron, 8 x 8 x 1 mm Response frequency 2 kHz (Average value) Power supply voltage 12 to 24 VDC ripple (p-p) 10% max. Operating voltage range 10 to 30 VDC Current consumption 17 mA max. Control output (Output type) NPN Control output (Switching capacity) 200 mA max. Operation mode NC (Normally Closed) Indicator Operation indicator (red LED) Protective circuits Output short-circuit protection, Reverse polarity protection, Surge suppressor Ambient temperature (Operating/Storage) -25 to 70 ℃ (with no icing or condensation) Ambient humidity (Operating/Storage) 35% to 95% Temperature influence ±10% max. of sensing distance at 23℃ over -25 to 70℃ range Voltage influence ±2.5% max. of sensing distance at rated voltage within rated voltage ±15% Insulation resistance 50 MΩ min. at 500 VDC (between charged parts and case) Dielectric strength 1,000 VAC 50/60 Hz 1 min (between charged parts and case) Vibration resistance 10 to 55 Hz, 1.5 mm double amplitude, 2 h each in X, Y, Z directions Shock resistance 1,000 m/s², 10 times each in X, Y, Z directions Degree of protection IP68 (IEC), Oil-proof (Company standard) Connection method Pre-wired model (Standard cable length: 2 m or 5 m) Material (Case/Sensing surface) Polyarylate Material (Clamping nuts) Polyacetal Weight (packaged) Approx. 40 g