Technical Specifications Parameter Specification Sensing Method Diffuse-reflective Sensing Distance White paper 300 x 300 mm: 1 m Differential Distance 20% max. of sensing distance Light Source Infrared LED (860 nm) Output Type PNP open collector Output Current Capacity 100 mA max. (26.4 VDC max.) Residual Voltage 1 V max. (load current <10 mA); 2 V max. (load current 10-100 mA) Operation Mode Light-ON / Dark-ON (selectable via switch) Response Time Operate or reset: 1 ms max. Supply Voltage 12 to 24 VDC ±10%, ripple (p-p) 10% max. Current Consumption 30 mA max. Sensitivity Setting Single-turn adjustment Protective Circuits Output short-circuit protection, Output reverse polarity protection, Power supply reverse polarity protection Degree of Protection IP67 (IEC 60529) Ambient Temperature (Operating) -25°C to 55°C (with no icing or condensation) Ambient Temperature (Storage) -40°C to 70°C Ambient Humidity (Operating) 35% to 85% (with no condensation) Ambient Humidity (Storage) 35% to 95% Ambient Illuminance Incandescent lamp: 3,000 lx max.; Sunlight: 10,000 lx max. Insulation Resistance 20 MΩ min. (500 VDC megger) Dielectric Strength 1,000 VAC, 50/60 Hz for 1 min Vibration Resistance (Destruction) 10 to 55 Hz, 1.5 mm double amplitude, 2 hours each in X, Y, Z directions Shock Resistance (Destruction) 500 m/s², 3 times each in X, Y, Z directions Indicators Operation indicator (orange), Stability indicator (green) Connection Method Pre-wired cable (2 m standard; 5 m variant available) Material (Case) PBT (Polybutylene terephthalate) Material (Lens) Denatured Polyarylate Dimensions (W x H x D) Square type (approx. 10.8 x 33.2 x 20 mm) Weight (Packed) Approx. 65 g