E3JM-10DM4-G-NN Safety Light Curtain | F3SJ Series Industrial Safety Sensor

The OMRON E3JM-10DM4-G-N is a built-in power supply photoelectric sensor with a through-beam sensing method (separate emitter and receiver) . It is designed for universal use, supporting a wide-range power supply compatible with both AC and DC voltages .

open

TEL：+86 13600179521
Mail：info@easyautomationparts.com
info@easyautomationparts.com

Parameters

Request a Quote

Return to List

Specifications Parameter Specification Sensing Method Through-beam (Emitter + Receiver set) Sensing Distance 10 m (with infrared light) Standard Sensing Object Opaque object, 14.8 mm dia. min. Light Source Infrared LED (950 nm) Output Type DC Non-contact (Open collector) Output Operation Light-ON / Dark-ON (selectable via switch) Output Current Capacity 50 mA max. Response Time Operate or reset: 30 ms max. Supply Voltage 12 to 240 VDC ±10%, ripple (p-p): 10% max. 24 to 240 VAC ±10%, 50/60 Hz Power Consumption 3 W max. (Emitter 1.5 W max. / Receiver 1.5 W max.) Connection Method Terminal block (PG13.5 conduit entry) Degree of Protection IP66 (IEC 60529) Insulation Resistance 20 MΩ min. at 500 VDC Dielectric Strength 2,000 VAC, 50/60 Hz for 1 min Vibration Resistance (Destruction) 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions Shock Resistance (Destruction) 500 m/s², 3 times each in X, Y, and Z directions Ambient Temperature (Operating) -25°C to 55°C (with no icing or condensation) Ambient Temperature (Storage) -30°C to 70°C Ambient Humidity (Operating) 45% to 85% (with no condensation) Ambient Illuminance (Receiver side) Incandescent lamp: 3,000 lx max. Material (Case) ABS (Acrylonitrile Butadiene Styrene) Material (Lens) Methacrylic resin Weight (Packed) Approx. 270 g