Key Technical Specifications Parameter Specification Series D5B Switch Type Mechanical Touch Switch / Tactile Limit Switch Circuit SPST-NC (Single Pole Single Throw - Normally Closed) Switch Function On-Mom (Momentary) Contact Form 1b (NC only; NO specification not included) Actuator Type Hemispheric (domed) plunger - Resin, R4.5 Size M10 (body diameter: 10mm, thread: M10×0.5) Contact Rating 1 mA to 30 mA at 5 to 30 VDC (resistive load) Maximum DC Voltage 30 V Operating Force (X-Y Direction) 0.98 N max (approx. 100 gf) Operating Force (Z Direction) 1.47 N max (approx. 150 gf) Pre-Travel (X-Y Direction) Reference value 0.7 mm Pre-Travel (Z Direction) Reference value 0.3 mm Total Travel (X-Y Direction) Reference value 1.3 mm Total Travel (Z Direction) Reference value 1.0 mm Termination Style Cable leads (pre-wired), 5m length Cable Specification Oil-resistant VCTF cable, φ3, 0.08mm² 2-core Mounting Type Panel Mount (threaded body) Ingress Protection (IP) IP67 - Dust tight, waterproof Housing Material Metal Switch Action Slow action (snap action contacts) Electrical Life 5,000,000 operations minimum (at 30 mA 30 VDC resistive load) Mechanical Life 10,000,000 operations minimum Mechanical Operating Frequency 120 operations/minute maximum Electrical Operating Frequency 60 operations/minute maximum Permissible Operating Speed 5 to 500 mm/s Actuator Strength 14.7 N (maximum force actuator can withstand) Permissible Operating Force (max) 1.96 N (standard value) Contact Resistance (Initial) With 5m cable: 3.1 Ω max Insulation Resistance 100 MΩ min. (at 250 VDC, between each terminal and non-live-metallic part) Dielectric Strength (Same Polarity) 250 VAC, 50/60Hz for 1 min (at TTP) Dielectric Strength (To Ground) 1,000 VAC, 50/60 Hz for 1 min Vibration Resistance (Malfunction) 10 to 55 Hz, 1.5 mm double amplitude Shock Resistance (Destruction) 1,000 m/s² max Shock Resistance (Malfunction) 300 m/s² max Operating Temperature -10°C to +70°C (with no icing) Operating Humidity 35% to 95% Body Length 33.3 mm Thread Size M10×0.5 Body Diameter 10 mm (M10 thread) Weight (Switch body) Approx. 21 g Weight (Cable) Approx. 10 g/m Appropriate Tightening Torque 2.94 N·m Part Status Active