Key Specifications Parameter Value/Description Series SYSDRIVE MX2 Rated Power (Heavy Duty / CT) 0.75 kW (1 HP) Rated Power (Normal Duty / VT) 1.1 kW (1.5 HP) Input Voltage / Phase Three-phase 200 – 240 VAC, 50/60 Hz Output Voltage 3-phase, 200 – 240 VAC (proportional to input voltage) Rated Output Current 5.0 A Frequency Range 0.1 – 580 Hz (up to 1000 Hz max with restrictions) Control Type Current Vector Control, Sensorless Vector Control, V/f control Starting Torque 200% at 0.5 Hz (Open Loop Vector Control) Low Speed Torque 150% or more at 3 Hz Overload Tolerance (Heavy Duty) 150% of rated output current for 1 minute Overload Tolerance (Normal Duty) 120% of rated output current for 1 minute Carrier Frequency 2 – 15 kHz (adjustable for silent operation) Braking Built-in braking transistor (external braking resistor required, sold separately) Braking Torque 120% (with optional braking resistor) Built-in Communication RS485 (Modbus RTU) Optional Fieldbus EtherCAT, CompoNet, DeviceNet, PROFIBUS, CANopen, MECHATROLINK-II (via optional communication units) Programming Drive Programming (flow-chart or text-based, up to 1000 steps) Positioning Function Built-in positioning with up to 8 preset positions and homing function; no external PLC required Safety Features STO (Safe Torque Off), compliant with EN ISO13849-1:2008 (Cat.3/PLd) and IEC60204-1 stop category 0 Motor Compatibility Induction Motor (IM) and Permanent Magnet (PM) motor control PC Interface USB port for programming via CX-Drive software Digital Inputs 10 Analog Inputs 4 Digital Outputs 6 Analog Outputs 1 Relay Output 1 Ambient Temperature -10°C to 50°C Storage Temperature -20°C to 65°C Cooling Method Natural air cooling (fanless) Enclosure Rating IP20 (open-type) Weight Approx. 1.1 – 1.2 kg (2.4 – 2.6 lbs) Dimensions (W × H × D) 68 × 128 × 145.5 mm Terminal Screw Size M4 Compliance CE, cULus, RoHS compliant