Key Specifications Parameter Value/Description Series SYSDRIVE MX2 Rated Power (Constant Torque / HD) 2.2 kW (3 HP) Rated Power (Variable Torque / ND) 3.0 kW (4 HP) Input Voltage / Phase Single-phase 200 – 240 VAC, 50/60 Hz Output Voltage 3-phase, 200 – 240 VAC (proportional to input voltage, max 240V) Rated Output Current (Constant Torque) 11.0 A Rated Output Current (Variable Torque) 12.0 A Rated Output Capacity (CT at 240V) 4.5 kVA Rated Output Capacity (VT at 240V) 4.9 kVA Frequency Range 0.1 – 1000 Hz (standard up to 580 Hz) Control Type Current Vector Control, Sensorless Vector Control, V/f control Starting Torque 200% at 0.5 Hz (Open Loop Vector Control) Overload Tolerance (HD) 150% of rated output current for 1 minute Overload Tolerance (VT) 120% of rated output current for 1 minute Acceleration/Deceleration Time 0.01 – 3600 seconds Braking Built-in braking transistor Braking Torque Approx. 20% (capacitor feedback) Built-in Communication RS485 (Modbus RTU) Optional Fieldbus DeviceNet, Profibus, CompoNet, EtherCAT, EtherNet/IP, MECHATROLINK-II Programming Drive Programming (flow-chart based, up to 1000 lines, 5 parallel tasks) Positioning Function Built-in positioning with up to 8 preset positions and homing function Safety Features STO (Safe Torque Off), compliant with EN ISO13849-1:2008 (Cat.3/PLd) Motor Compatibility Induction Motor (IM) and Permanent Magnet (PM) motor control PC Interface USB port (Type B) for programming via CX-Drive software Backup Supply 24 VDC backup supply for control board Analog Inputs 1 Digital Inputs 7 Digital Outputs 2 Relay Output 1 Ambient Temperature -10°C to 40°C Storage Temperature -20°C to 65°C Cooling Method Forced-air cooling (internal fan) Enclosure Rating IP20 (open-type) Weight Approx. 1.8 – 2.0 kg (4.0 – 4.4 lbs) Dimensions (W × H × D) 108 × 128 × 170.5 mm Terminal Screw Size M4 GTIN/EAN 4548583484511 Compliance CE, cULus, RoHS compliant