Key Specifications Parameter Value/Description Series SYSDRIVE MX2 (ZV2 version) Rated Power (Constant Torque) 0.4 kW (1/2 HP) Rated Power (Variable Torque) 0.55 kW (0.75 HP) Input Voltage / Phase Single-phase 200 – 240 VAC, 50/60 Hz Output Voltage 3-phase, 200 – 240 VAC (proportional to input voltage) Rated Output Current (Constant Torque) 3.0 A Rated Output Current (Variable Torque) 3.5 A Rated Output Capacity (CT) 1.0 kVA (at 200V) / 1.2 kVA (at 240V) Frequency Range 0.10 – 580 Hz (up to 1000 Hz with restrictions) Control Type Current Vector Control, V/f control, Sensorless Vector Control Starting Torque 200% at 0.5 Hz (Open Loop Vector Control) Overload Tolerance (CT) 150% for 1 minute Overload Tolerance (VT) 120% for 1 minute Carrier Frequency 2 – 15 kHz (adjustable, derating may apply) Braking Built-in braking transistor (braking resistor required, sold separately) Braking Torque 100% without resistor (capacitor feedback), up to 150% with optional resistor Minimum Braking Resistor Value 100 Ω Built-in Communication RS485 (Modbus), USB port Optional Fieldbus EtherCAT, CompoNet, DeviceNet, Profibus, CANopen, MECHATROLINK-II Programming Drive Programming (Flow-chart or Text-based, up to 1000 lines, 5 parallel tasks) Safety Features STO (Safe Torque Off), ISO13849-1 Cat.3 PLd (two safety inputs + EDM output) Motor Compatibility Induction Motor (IM) and Permanent Magnet (PM) motor control Ambient Temperature -10°C to 50°C Ambient Humidity 90% RH or less (non-condensing) Altitude 1000m or less Cooling Method Self-cooling (natural convection, no fan) Enclosure Rating IP20 (open-type) Weight 1.0 kg (approx.) Dimensions (W × H × D) 68 × 128 × 122.5 mm Protections / Compliance CE, cULus, RoHS compliant