Key Specifications Parameter Value/Description Series SYSDRIVE 3G3MZ-ZV2 Product Name Open-loop Vector Control Inverter / Compact AC Drive Rated Power 1.5 kW (2 HP) Input Voltage / Phase Single-phase 200 – 240 VAC, 50/60 Hz Output Voltage 3-phase, 200 – 240 VAC (Max output cannot exceed input voltage) Rated Output Capacity 2.9 kVA Rated Output Current 7.5 A Input Current 15.7 A Frequency Range 0.1 – 600 Hz Carrier Frequency 1 – 15 kHz (adjustable for silent operation) Control Type Sine Wave PWM (V/f control, open-loop vector control selectable) Starting Torque 200% at 0.5 Hz (Open Loop Vector Control) Torque at 3Hz 150% or higher Overload Tolerance 150% of rated output current for 1 minute Braking Built-in braking transistor (braking resistor required for increased capacity, sold separately) Braking Torque Approx. 20% continuous; approx. 125% with optional braking resistor Minimum Braking Resistor Value 40Ω Built-in Communication RS485 (Modbus) Optional Fieldbus EtherCAT, CompoNet, DeviceNet, Profibus-DP, CANopen (via optional communication units) Accel/Decel Time 0.00 – 600.0 sec (independently settable) External Frequency Signal 0–10 VDC (47kΩ), 4–20 mA (250Ω), frequency setting knob, multi-step speed (15 steps) Protection Functions Motor overload (electronic thermal), overcurrent (approx. 240% or higher trip), overvoltage, undervoltage, overheating, ground fault Ambient Temperature -10°C to 50°C (close mounting: -10°C to 40°C) Ambient Humidity 90% RH or less (non-condensing) Altitude 1000m or less Storage Temperature -20°C to 60°C Vibration Resistance 10–20Hz: 9.8 m/s² (1G) or less; 20–50Hz: 5.9 m/s² (0.6G) or less Enclosure Rating IP20 (panel-mount type) Cooling Method Forced air cooling Weight 1.9 kg Dimensions (W × H × D) 108 × 128 × 170.5 mm (approximate) Protections / Compliance CE, RoHS compliant