Key Specifications Parameter Specification Model TL-N5MY1 Type Inductive Proximity Sensor Shape Rectangular / Square Shielding Unshielded (Non-shielded) Output Configuration AC 2-wire Operation Mode NO (Normally Open) Detection Specifications Parameter Specification Sensing Distance 5 mm ±10% Setting Distance 0 to 4 mm Differential Travel (Hysteresis) 15% max. of sensing distance Standard Sensing Object Iron 30 x 30 x 1 mm Detectable Object Ferrous metals (sensitivity reduces for non-ferrous metals) Response Frequency 10 Hz (Average value) Electrical Specifications Parameter Specification Power Supply Voltage 100 to 220 VAC (50/60 Hz) Operating Voltage Range 90 to 250 VAC Control Output (Load Current) 10 to 200 mA Leakage Current 0.8 mA max. Residual Voltage 5 V max. (Load current 200 mA, Cable length 2 m) Protective Circuits Surge suppressor Indicator Operation indicator (red) Environmental & Physical Specifications Parameter Specification Degree of Protection IP67 (IEC 60529) - Dust-tight and water-resistant Oil Resistance Meets Company standard: Oil-proof Ambient Temperature (Operating) -25 to 70°C (no icing) Ambient Temperature (Storage) -25 to 70°C Ambient Humidity (Operating) 35% to 95% (no condensation) Temperature Influence ±10% max. of sensing distance at 23°C in range -25 to 70°C Voltage Influence ±1% max. of sensing distance at rated voltage in rated voltage ±10% range Insulation Resistance 50 MΩ min. at 500 VDC between charged parts and case Dielectric Strength 2,000 VAC 50/60 Hz for 1 min between charged parts and case Vibration Resistance 10 to 55 Hz, 1.5 mm double amplitude, 2 hours each in X, Y, Z Shock Resistance 500 m/s², 10 times each in X, Y, Z Connection Method Pre-wired cable (standard length: 2 m) Cable Specifications Vinyl (PVC)-insulated round cord, φ6, 2-core Head Size (W x H x D) 25 x 25.5 x 50 mm Housing Material Heat-resistant ABS resin Sensing Surface Material Heat-resistant ABS resin Weight (Packaged) Approx. 190 g