TL-Q5MB2-Z Safety Light Curtain | F3SJ Series Industrial Safety Sensor

The TL-Q5MB2-Z is a rectangular (square-shaped), unshielded inductive proximity sensor from Omron's TL-Q series. It features a DC 3-wire, PNP output with Normally Closed (NC) operation mode

open

TEL：+86 13600179521
Mail：info@easyautomationparts.com
info@easyautomationparts.com

Parameters

Request a Quote

Return to List

Key Specifications Parameter Specification Model TL-Q5MB2-Z Type Inductive Proximity Sensor Shape Rectangular / Square Shielding Unshielded (Non-shielded) Output Type PNP (Open Collector) Operation Mode NC (Normally Closed) Detection Specifications Parameter Specification Sensing Distance 5 mm ±10% Setting Distance 0 to 4 mm Differential Travel (Hysteresis) 10% max. of sensing distance Standard Sensing Object Iron 15×15×1 mm Detectable Object Ferrous metals (sensing distance reduced for non-ferrous metals) Response Frequency 500 Hz Response Time 2 ms max. Electrical Specifications Parameter Specification Power Supply Voltage 12 to 24 VDC (10 to 30 VDC operating range) Current Consumption 10 mA max. (at 24 VDC, no load) Control Output (Switching Capacity) 50 mA max. (at 30 VDC) Residual Voltage 1 V max. (at 50 mA load, 2m cable) Protective Circuits Power supply reverse polarity protection, Surge absorber Indicator Detection indicator (Red) Environmental & Physical Specifications Parameter Specification Degree of Protection IP67 (IEC 60529) - Dust-tight and water-resistant Ambient Temperature (Operating) -25 to 70°C (no icing) Ambient Humidity (Operating) 35% to 95% RH (no condensation) Vibration Resistance 10 to 55 Hz, 1.5 mm double amplitude, 2 hours each in X, Y, Z Shock Resistance 200 m/s², 10 times each in X, Y, Z Connection Method Pre-wired cable (standard length: 2 m) Housing Material Heat-resistant ABS resin Dimensions (W×H×D) Approx. 17×17×28 mm Weight (Packed) Approx. 90 g