Products
Products
ABB Allen-Bradley ADEPT ALSTOM
All Categories
AMAT B&R BACHMANN BENTLY Bosch Rexroth BAILEY CUTLER-HAMMER DEIF DANAHER Enterasys Extreme EATON ELAU EMERSON EPRO FANUC servo motor FOXBORO GE HIMA Honeywell ICSTriplex IFM Kollmorgen SIEMENS Schneider WOODWARD YASKAWA Omron YOKOGAWA MOOG MOTOROLA NI RELIANCE Rexroth SEW-EURODRIVE TRICONEX Weidmueller Mitsubishi SICK FISHER
home
eaton
EPF31P-M304V1O2PS
Category Parameter Specification / Typical Value Electrical Ratings Rated Voltage 300 VAC (3~ + PE) Rated Current ~16 A (Critical: Must verify exact value with datasheet - common values are 16A, 20A, 30A for this form factor) Frequency 50/60 Hz Test Standards Safety Standards UL 60939, IEC 60939, EN 60939 EMC Standards Designed to meet CISPR 11/32, EN 55011/55032 Filter Performance Insertion Loss > 60 dB (Typical at 1 MHz) > 40 dB (Typical at 100 kHz) Leakage Current Line to Ground Typically < 5 mA (at 250VAC, 50Hz) General Data Number of Phases 3-Phase + Protective Earth (PE) Connection Type Screw Terminals (for both line and load sides) Mounting Through-hole or bracket mounting (panel mount) Operating Temperature -25 °C to +100 °C Housing Material Metal case (typically aluminum) for shielding

More details >> Request a Quote >>
eaton
EF2TO006S6
Category Parameter Specification / Typical Value Motor Protection Setting Current Range (Iᵣ) 0.06 - 0.6 A (This is the core protective range) Tripping Class 10 (Standard) / 20 (e.g., for high-inertia loads) - Selectable Protection Functions • Overload • Phase Loss / Unbalance • Jam Protection (with adjustable trip time) • Earth Fault Protection (optional, depends on version) Electrical Characteristics Rated Operational Voltage (Uᵢ) Up to 690 V AC Supply Voltage (for electronics) Typically 24-240 V AC/DC (Auxiliary voltage for the relay's own circuitry) Contacts Output Auxiliary Contacts • 1 NO (95-96) - Fault Signal • 1 NC (97-98) - Fault Signal Rated Current of Aux. Contacts Typically 6 A General Data Mounting Snap-on to compatible Eaton contactors (e.g., DILM series) Standards IEC/EN 60947-4-1, UL 508 Status Indication LED indicators for "Ready", "Alarm/Trip" Ambient Temperature -20 °C to +60 °C

More details >> Request a Quote >>
eaton
TO-2-1/E
Category Parameter Specification / Typical Value Application & Configuration Protected Circuit Signal circuits (e.g., 4-20 mA, digital I/O) Circuit Configuration 2-pole (Line-to-Line and Line-to-Ground protection) Connection In-series with the signal line Electrical Characteristics Nominal Voltage 8 - 24 V DC (Typical for signal applications) Max. Continuous Operating Voltage (Uc) ~30 V DC (Please verify in datasheet) Nominal Current (In) Up to 250 mA (Suitable for most signal loops) Voltage Drop < 1.5 V (Low, to minimize impact on the signal) Surge Protection Performance Standards Complies with IEC 61643-21 Nominal Discharge Current (In) 5 kA (8/20 μs waveform) Max. Discharge Current (Imax) 10 kA (8/20 μs waveform) Protection Level (Up) < 40 V (at In, typical for this class) General Data Mounting 35 mm DIN Rail Connection Type Screw terminals Housing Material Plastic (PA 6.6) Operating Temperature -40 °C to +80 °C Status Indication None (This is a basic model without visual fault indicator)

More details >> Request a Quote >>
eaton
TO-2-1/EA/SVB
Category Parameter Specification / Typical Value Application & Configuration Protected Circuit Signal circuits (e.g., 4-20 mA, digital I/O) Circuit Configuration 2-pole (Line-to-Line and Line-to-Ground protection) Connection In-series with the signal line Electrical Characteristics Nominal Voltage 8 - 24 V DC Max. Continuous Operating Voltage (Uc) ~30 V DC Nominal Current (In) Up to 250 mA Voltage Drop < 1.5 V Surge Protection Performance Standards Complies with IEC 61643-21 Nominal Discharge Current (In) 5 kA (8/20 μs) Max. Discharge Current (Imax) 10 kA (8/20 μs) Protection Level (Up) < 40 V (at In) Monitoring & Signaling (EA Option) Alarm Contact Floating changeover contact (SPDT) Contact Rating Typically 24V DC / 2A (or 230V AC / 2A) Function Changes state upon internal failure of the SPD, signaling the need for replacement. General Data Mounting 35 mm DIN Rail Connection Type Screw terminals (for both signal and alarm contacts) Housing Material Plastic (PA 6.6) Operating Temperature -40 °C to +80 °C Status Indication None (Visual status may not be present; reliance on alarm contact)

More details >> Request a Quote >>
eaton
P3-63/EA/SVB-SW
Category Parameter Specification / Typical Value Input Characteristics Input Voltage 100 - 240 VAC (Wide Range) Input Frequency 50 / 60 Hz Inrush Current Limiting Yes Output Characteristics Output Voltage Likely 24 V DC (Must be verified with datasheet) Rated Output Current ~2.6 A (if output is 24V) Rated Output Power 63 W Efficiency Typically > 89% Ripple and Noise < 100 mVpp Redundancy Function (EA) Redundancy Capability Yes, designed for parallel operation Key Component Integrated OR-ing diode Integrated Control Function (-SW) PLC Runtime Pre-installed license for Eaton SPC/SPS Programming Software Eaton XVS software package Memory for User Program Typically several MB (for logic, data logs, recipes) Protection & Safety Overload Protection Electronic, auto-recovery Overvoltage Protection Electronic, auto-recovery Standards CE, cULus Listed Environmental & Mechanical Operating Temperature -25 °C to +70 °C (with derating) Cooling Method Fanless (Convection) Mounting Standard 35 mm DIN Rail Connections Screw Terminals

More details >> Request a Quote >>
eaton
P3-63/EA/SVB
Category Parameter Specification / Typical Value Input Characteristics Input Voltage 100 - 240 VAC (Wide Range, Auto-Sensing) Input Frequency 50 / 60 Hz Inrush Current Limiting Yes Output Characteristics Output Voltage Likely 24 V DC (Must be verified with datasheet) Rated Output Current ~2.6 A (if output is 24V) Rated Output Power 63 W Efficiency Typically > 89% Ripple and Noise < 100 mVpp Line Regulation < 0.5% Load Regulation < 0.5% Redundancy Function (EA) Redundancy Capability Yes, designed for parallel operation Key Component Integrated OR-ing diode to prevent reverse current Protection & Safety Overload Protection Electronic, auto-recovery Overvoltage Protection Electronic, auto-recovery Short-Circuit Protection Yes Standards CE, cULus Listed Environmental & Mechanical Operating Temperature -25 °C to +70 °C (with derating above 60°C) Cooling Method Fanless (Convection) Mounting Standard 35 mm DIN Rail Protection Rating IP20 Connections Screw Terminals

More details >> Request a Quote >>
eaton
P1-25/I2/SVB
Category Parameter Specification / Typical Value Input Characteristics Input Voltage 100 - 240 VAC (Wide Range) Input Frequency 50 / 60 Hz Output Characteristics Output Voltage 24 V DC Rated Output Current ~1.0 A (at 24V) Rated Output Power 25 W Efficiency Typically > 80% Communication Interface (I2) Protocol IO-Link Functionality • Remote monitoring of output parameters (U, I, P, T) • Diagnostic data (e.g., overload events, short-circuit events) • Parameter setting Protection & Safety Overload Protection Electronic, auto-recovery Overvoltage Protection Electronic, auto-recovery Short-Circuit Protection Yes Environmental & Mechanical Operating Temperature -25 °C to +70 °C (with derating) Cooling Method Fanless (Convection) Mounting Standard 35 mm DIN Rail Connections Screw Terminals (for Power) & IO-Link Port (for Communication)

More details >> Request a Quote >>
eaton
M22-K10
Category Parameter Specification / Typical Value Electrical Characteristics Contact Configuration 1 NO (One Normally Open Contact) Rated Operational Voltage (Ue) Up to 500V AC / 600V DC Rated Impulse Withstand Voltage (Uimp) 6 kV Rated Thermal Current (Ith) 10 A Utilization Category (AC) AC-15: Control of electromagnetic loads (>72 VA) Utilization Category (DC) DC-13: Control of DC electromagnets Mechanical & Switching Electrical Life > 1,000,000 cycles (at rated operational current) Mechanical Life > 5,000,000 cycles Degree of Protection (with actuator) IP65 (Front panel) General Data Mounting Hole Diameter 22.5 mm (ISO Standard) Connection Type Screw Clamp Terminals Actuator Dependency Requires a separate M22 series pushbutton actuator (e.g., a colored button cap) Material Thermoplastic housing Standards IEC/EN 60947-5-1, UL 508, CSA C22.2 No. 14

More details >> Request a Quote >>
eaton
HI11-P1/P3E
Category Parameter Specification / Typical Value Function & Compatibility Function DC OK / Power Good Signal Compatible Series Eaton P1 Series and P3 Series Power Supplies Mounting Snap-on or direct attachment to the compatible power supply unit Signal Contact Characteristics Contact Type Floating Changeover Contact (SPDT) - 1 NO (Normally Open) + 1 NC (Normally Closed) Contact Rating (Max.) Typically 240V AC, 2A or 30V DC, 2A (Resistive load) Operation State Relay is energized when DC output voltage is normal. Electrical Characteristics Supply Voltage Self-powered from the host power supply (no external wiring required) Response Time Typically a few tens to hundreds of milliseconds (to avoid nuisance tripping on short dips) General Data Connection Type Screw Terminals for the signal contact output Status Indication Usually an LED indicator to show the "DC OK" status Operating Temperature -25 °C to +60 °C (or as per the host PSU specification) Standards Relevant parts of IEC/EN 60947, UL 508

More details >> Request a Quote >>
eaton
P1-32/EA/SVB
Category Parameter Specification / Typical Value Input Characteristics Input Voltage 100 - 240 VAC (Wide Range, Auto-Sensing) Input Frequency 50 / 60 Hz Inrush Current Limiting Yes (NTC Thermistor) Output Characteristics Output Voltage Likely 24 V DC (Must be verified with datasheet) Rated Output Current ~1.3 A (if output is 24V) Rated Output Power 32 W Efficiency Typically > 81% Ripple and Noise < 150 mVpp Redundancy Function (EA) Redundancy Capability Yes, designed for parallel operation Key Component Integrated OR-ing diode to prevent reverse current Protection & Safety Overload Protection Electronic, auto-recovery Overvoltage Protection Electronic, auto-recovery Short-Circuit Protection Yes Standards CE, cULus Listed Environmental & Mechanical Operating Temperature -25 °C to +70 °C (with derating above 60°C) Cooling Method Fanless (Convection) Mounting Standard 35 mm DIN Rail Protection Rating IP20 Connections Screw Terminals

More details >> Request a Quote >>
1 2
···
529 530 531 532 533 534 535
···
5680 5681
Related products
DGMPC-5-ABN-BAN-30
Parameter Value / Description Product Name Eaton DGMPC-5-ABN-BAN-30 Product Line Eaton D4B / D4C Series (Heavy-Duty Limit Switches) Type Heavy-Duty Limit Switch with Maintained Contact Action Actuator Type Top Push Plunger with Roller Contact Configuration 2 Normally Open (NO) Contacts (This is the standard configuration for the "PC-5" contact block) Rated Operating Current 10 A at 600 V AC Rated Insulation Voltage 600 V Electrical Life 1,000,000 operations (at rated load) Mechanical Life 10,000,000 operations Degree of Protection IP65 (Dust-tight and protected against water jets) Electrical Connection Screw Clamp Terminals Housing Material Metal (Die-cast zinc) Operating Temperature -25 °C to +85 °C (depending on seal material) Pretravel The distance the plunger moves from its free position to the operating point. (Specific value requires datasheet, e.g., ~4.8mm). Overtravel The distance the plunger can travel beyond the operating point. (Specific value requires datasheet). Operating Force The force required to actuate the plunger (Specific value requires datasheet, e.g., ~3.5 N). Reset Force The force exerted by the internal spring to return the plunger. Standards Compliance IEC/EN 60947-5-1, UL 508, CSA C22.2 No. 14
FX5-CCL-MS
The Mitsubishi FX5-CCL-MS is a CC-Link communication module designed for the MELSEC iQ-FX5 series PLC, enabling high-speed industrial network connectivity. This module allows FX5 PLCs to function as either a CC-Link master or slave device, providing flexible integration with CC-Link compatible devices such as remote I/O, drives, and other PLCs.
DILAC-31
Technical Parameters Parameter Specification Model DILAC-31 Rated Operational Current 32 A Motor Power Range (at 400V AC) 15 kW Rated Operational Voltage 690 V AC Control Voltage 24-240 V AC/DC (auto-sensing, varies by specific model) Setting Range 25-32 A (adjustable) Protection Features Overload protection, phase failure protection, unbalanced load protection Auxiliary Contacts 1 NO + 1 NC (minimum) Mounting DIN Rail (35mm) Protection Degree IP20 Standards & Approvals IEC/EN 60947-4-2, UL 508, CE, cULus, RoHS