The ABB S204‑D16 miniature circuit breaker is a 4‑pole compact overcurrent protection device designed for use in low‑voltage AC electrical systems. It features a D‑type trip characteristic, making it suitable for circuits with high inrush currents such as motors and transformers. The breaker provides thermal and electromechanical protection against overloads and short circuits, and is DIN‑rail mountable for easy installation in distribution panels. Its robust construction and compliance with international standards make it suitable for residential, commercial, and light industrial applications.

The ABB ST204M‑D10 (often referred to by catalogue type SH204‑D10) is a 4‑pole miniature circuit breaker (MCB) from ABB’s S‑200 / System Pro M Compact series, designed for low‑voltage electrical protection. It provides reliable overload and short‑circuit protection for distribution circuits in residential, commercial, and light industrial installations. This compact DIN‑rail mountable breaker uses a D‑type trip characteristic, offering good tolerance for high inrush currents such as those from motors or transformers while still offering responsive circuit protection

The ABB AL26‑30‑10 24 V DC Contactor (1SBL243001R8110) is a three‑pole DC‑operated power contactor designed for reliable control and switching of three‑phase electrical power circuits up to 690 V AC. It features three main normally‑open (NO) contacts and one built‑in auxiliary normally‑open contact for control signalling or interlock functions. The contactor uses a 24 V DC control coil with low power consumption, making it suitable for direct control by PLC outputs and DC control systems. Its compact block‑type design with screw terminals is ideal for installation in industrial and commercial control panels. It is suitable for motor control, lighting, capacitor switching, isolation, and general power loads

The ABB MS325‑9 Manual Motor Starter is a three‑pole electromechanical protection device used for manual control (ON/OFF) and protection of electric motors and associated circuits. It combines manual switching with overload, short‑circuit, and phase‑failure protection without the need for external fuses. The device includes a rotary handle with clear position indication, a trip‑free mechanism, and built‑in disconnect functionality. It is suitable for both three‑phase and single‑phase applications and can accommodate add‑on accessories such as auxiliary contacts, signalling contacts, undervoltage releases, shunt trips, and locking devices.

The ABB 1SDA051000R1 is a three‑pole molded case circuit breaker (MCCB) from the ABB TMAX T2S 160 series. It is designed for fixed installation with front terminals and features a thermo‑magnetic (TMD) trip unit with adjustable thermal and fixed magnetic settings. This breaker provides reliable overload and short‑circuit protection for low‑voltage electrical distribution systems, making it suitable for industrial, commercial, and panelboard applications where dependable circuit protection is required. The thermomagnetic design allows adjustable current settings from 63 A up to 630 A to match protective coordination needs.

The ABB AX12‑30‑10‑84 is a three‑pole general‑purpose AC contactor from the ABB AX series, designed for control and switching of three‑phase motors and power circuits. It features a 110 V AC coil (50 Hz) / 110–120 V AC coil (60 Hz) and a compact block‑type design with three normally open main contacts and one auxiliary contact for control signalling. This contactor is suitable for industrial and commercial applications including motor starters, lighting, and general power switching up to 690 V AC.

The ABB AL9‑30‑10 24 V DC Contactor (1SBL143001R8110) is a compact three‑pole DC‑operated power contactor designed for control and switching of three‑phase motors and general power circuits. It features three main normally‑open (NO) contacts and one built‑in auxiliary normally‑open contact for control signalling or interlock functions. The contactor uses a 24 V DC control coil with low power consumption, enabling direct operation from DC control systems or PLC outputs. It is suitable for industrial and commercial usage across a wide range of applications where reliable contact switching is required.

The ABB AL9‑30‑10 220 V DC Contactor (1SBL143001R8810) is a three‑pole DC‑operated power contactor designed for control and switching of three‑phase power circuits in industrial and commercial applications. It features three normally‑open main contacts and one normally‑open auxiliary contact for control signalling or interlock functions. The contactor is equipped with a 220 V DC coil and is suitable for switching motors, lighting, and general power loads up to 690 V AC. Its compact block‑type design with screw terminals enables easy installation in control panels and automation systems.

The ABB 1SDA068057R1 is a three‑pole molded case circuit breaker (MCCB) from the ABB SACE Tmax XT3N series. It features a thermo‑magnetic (TMD) trip unit with an adjustable current setting range from 160 A up to 1600 A for reliable overload and short‑circuit protection in low‑voltage AC/DC power distribution systems. Designed for fixed installation with front bolt terminals, this breaker offers robust performance, high interrupting capability, and dependable protection for industrial and commercial electrical installations.

The ABB 1SDA067032R1 is a four‑pole molded case circuit breaker (MCCB) from ABB’s Tmax XT2N series, featuring a thermomagnetic (TMD) trip unit with adjustable current settings from 20 A to 300 A. It is designed for fixed installation with front bolt terminal connections and provides reliable overload and short‑circuit protection for low‑voltage electrical distribution systems. This MCCB is suitable for applications in industrial and commercial power distribution where dependable protective coordination and robust interruption performance are required