Technical Parameters Category Parameter Specification / Description General Model Series 2625 Type Direct-Operated Pressure Reducing Regulator Pressure Ratings Maximum Inlet Pressure (P1) 400 psig (27.6 bar) Outlet Pressure Range (P2) Adjustable: Common ranges from 0-25 psig to 0-200 psig, depending on the specific spring range installed. Pressure Rating 400 psig (27.6 bar) Body Rating. Flow & Capacity Flow Capacity (Cv) Approximately 0.14 (Designed for low to moderate flows). End Connections 1/4" NPT (Internal Pipe Thread) Materials & Environment Body Material Aluminum Internal Parts Stainless Steel, Brass Diaphragm Material Nylon / Elastomer Seat Material Elastomer (e.g., Buna-N) for tight shut-off. Ambient Temperature -20°F to 150°F (-29°C to 66°C)

Technical Parameters Category Parameter Specification / Description General Model 546NS Type Pilot-Operated Nitrogen Sealing Regulator Pressure Ratings Maximum Inlet Pressure (P1) 400 psig (27.6 bar) Outlet Pressure Range (P2) Adjustable: Commonly from a very low 3" H₂O (0.75 kPa) up to 25 psig (1.7 bar) or higher, depending on the pilot spring. Pressure Rating 400 psig (27.6 bar) Body Rating. Flow & Capacity Flow Capacity (Cv) Low to Moderate, suitable for sealing/purge flow rates. End Connections 1/4" NPT or 1/2" NPT (Internal Pipe Thread) Performance Accuracy & Stability Very high, due to pilot-operated design. Minimal droop or creep. Construction & Materials Body Material Aluminum Internal Parts Stainless Steel, Brass Pilot Filter Standard, 40 micron. Diaphragm Material Nylon / Elastomer

Technical Parameters Category Parameter Specification / Description General Model 546S Type Pilot-Operated Pressure Reducing Regulator (Steam) Pressure & Temperature Body Pressure Rating (ANSI) ANSI Class 125, 150, 250, or 300 (depending on body size and order). Maximum Inlet Pressure (P1) Varies with body class; can be up to 600 psig (41 bar) or higher for certain classes. Outlet Pressure Range (P2) Wide range, adjustable via the pilot spring. Common ranges from 10 to 250 psig (0.7 to 17 bar). Temperature Range Suitable for saturated and superheated steam temperatures. Flow & Sizing Flow Capacity (Cv) High. Ranges from ~5 to over 200+, depending on the valve size (e.g., 1/2", 1", 2", 3"). End Connections Flanged (RF, RTJ) or Screwed (NPT). Construction & Materials Body Materials Cast Steel (WCB) as standard for steam service. Trim Materials Stainless Steel. Pilot Valve 546 Pilot configured for steam service. Options Pilot Options May include a strainer to protect the pilot from pipeline scale and debris, which is crucial in steam systems.

Technical Parameters Category Parameter Specification / Description General Model DVC6010 Type Digital Valve Controller (Single-Action) Product Family FIELDVUE Primary Protocol HART Input & Output Input Signal 4 to 20 mA DC, two-wire Supply Pressure Up to 150 psig (10.3 bar) Output Action Single-Action (One output port for spring-return actuators) Performance Linearity ±0.5% of span Hysteresis Less than 0.4% of span Air Consumption Steady State: ~0.04 SCFM (1.1 NLPM) Environmental Ambient Temperature -40°F to 185°F (-40°C to 85°C) Enclosure Rating Type 4X, 6 (IP66/67); Dust-tight and protected against water. Hazardous Area Certifications FM/CSA: Explosion-proof, Intrinsically Safe (Class I, II, III, Div. 1 & 2) ATEX/IECEx: Ex db, Ex tb, Ex ia [ia] (Zone 1 & 21) Physical Conduit Openings Two 1/2" NPT Pneumatic Connections Supply & Output: 1/4" NPT

Technical Parameters Category Parameter Specification / Description General Model Series 4221 (within ET Family) Type Top-Guided Globe Valve Flow Characteristic Linear, Equal Percentage, or Quick Open (depends on trim). Pressure & Temperature Pressure Rating (ANSI) ANSI Class 150, 300, 600 Max. Allowable Pressure Up to 1480 psig (102 bar) for Class 600. Temperature Range Standard: -350°F to 1100°F (-212°C to 593°C). Depends on body/trim materials and seals. Flow & Sizing Valve Sizes 1/2" to 6" (DN 15 to DN 150) Flow Capacity (Cv) Ranges from ~1 (for 1/2") to ~200 (for 6"), depending on trim size. End Connections Flanged (RF, RTJ), Buttweld, or Socket Weld. Materials & Construction Body Materials Alloy 20 (CN7M) is a very common standard material for the 4221, providing excellent corrosion resistance. Also available in 316 Stainless Steel (CF8M), Hastelloy, Duplex Stainless Steel, and others. Trim Materials Standard Trim: Stainless Steel. Severe Service Trim: Hardened alloys, Stellite, Ceramics. Seat Leakage ANSI Class II, IV, V, or VI (depending on trim selection). Actuator Mounting Designed for Fisher 1055/1061/1070 series pneumatic diaphragm actuators or other linear actuators.

Technical Parameters Category Parameter Specification / Description General Model Series 4211 (within ET Family) Type Top-Guided Globe Valve Flow Characteristic Linear, Equal Percentage, or Quick Open (depends on trim). Pressure & Temperature Pressure Rating (ANSI) ANSI Class 150, 300, 600 Max. Allowable Pressure Up to 1480 psig (102 bar) for Class 600. Temperature Range Standard: -350°F to 1100°F (-212°C to 593°C). Depends on body/trim materials and seals. Flow & Sizing Valve Sizes 1/2" to 6" (DN 15 to DN 150) Flow Capacity (Cv) Ranges from ~1 (for 1/2") to ~200 (for 6"), depending on trim size. End Connections Flanged (RF, RTJ), Buttweld, or Socket Weld. Materials & Construction Body Materials Carbon Steel (WCB) is the most common standard material. Also available in Stainless Steel (CF8M) and other alloys. Trim Materials Standard Trim: Stainless Steel. Severe Service Trim: Available for anti-cavitation, noise reduction, etc. Seat Leakage ANSI Class II, IV, V, or VI (depending on trim selection). Actuator Mounting Designed for Fisher 1055/1061/1070 series pneumatic diaphragm actuators or other linear actuators.

Technical Parameters Category Parameter Specification / Description General Model C1 Type Globe Valve, Weir Diaphragm Actuated Body Material Polypropylene (PP) or PVDF Pressure & Temperature Pressure Rating Depends on size and material. PP: Up to 150 psig (10.3 bar) at 68°F (20°C). PVDF: Up to 125 psig (8.6 bar) at 68°F (20°C). Pressure rating decreases with temperature. Temperature Range PP: -0°F to 180°F (-18°C to 82°C) PVDF: -10°F to 280°F (-23°C to 138°C) Flow & Sizing Valve Sizes 1/2" to 3" (DN 15 to DN 80) Flow Capacity (Cv) Low to moderate, suitable for chemical dosing and control. End Connections Flanged (ANSI, DIN) or Threaded (NPT) Actuator Actuator Type Pneumatic Diaphragm Actuator (Spring-Return)

Technical Parameters Category Parameter Specification / Description General Model FS-67CFR-239 Type Digital Pressure Reducing Regulator Product Line FIELDVUE Primary Protocol HART Input & Control Input Signal 4 to 20 mA DC, two-wire Supply Pressure (Max) 400 psig (27.6 bar) Setpoint Range (P2) Defined by "-239" code. This typically indicates a specific range, commonly 3 to 115 psig (0.2 to 7.9 bar). Performance Output Pressure Range 0 to 100 psig (0 to 6.9 bar) - Limited by supply pressure and internal components. Accuracy ±0.5% of span (typical) Supply Pressure Effect ±0.2 psig for a 50 psig supply change Flow Capacity (Cv) Specific to the "-239" configuration. Likely a standard capacity for general instrument air applications. Environmental Ambient Temperature -40°F to 175°F (-40°C to 80°C) Enclosure Rating Type 4X, 6 (IP66/67) Hazardous Area Certifications FM/CSA & ATEX/IECEx: Explosion-proof & Intrinsically Safe

Technical Parameters Category Parameter Specification / Description General Model FS-67CFR-225 Type Digital Pressure Reducing Regulator Product Line FIELDVUE Primary Protocol HART Input & Control Input Signal 4 to 20 mA DC, two-wire Supply Pressure (Max) 400 psig (27.6 bar) Setpoint Range (P2) Defined by "-225" code. This typically indicates a lower range, commonly 3 to 60 psig (0.2 to 4.1 bar). Performance Output Pressure Range 0 to 60 psig (0 to 4.1 bar) - *This is the key difference from the -239 model.* Accuracy ±0.5% of span (typical) Supply Pressure Effect ±0.2 psig for a 50 psig supply change Flow Capacity (Cv) Specific to the "-225" configuration. Likely similar to the -239 model. Environmental Ambient Temperature -40°F to 175°F (-40°C to 80°C) Enclosure Rating Type 4X, 6 (IP66/67) Hazardous Area Certifications FM/CSA & ATEX/IECEx: Explosion-proof & Intrinsically Safe

Technical Parameters Category Parameter Specification / Description General Model 67CF-1663-385127 Type Digital Pressure Reducing Regulator Product Line FIELDVUE Primary Protocol HART Input & Control Input Signal 4 to 20 mA DC, two-wire Supply Pressure (Max) 400 psig (27.6 bar) Setpoint Range (P2) Defined by the configuration. The "1663" code suggests a specific range, likely covering a common span like 3-60 psig or 3-115 psig. Performance Output Pressure Range 0 to 100 psig (0 to 6.9 bar) Accuracy ±0.5% of span (typical) Supply Pressure Effect ±0.2 psig for a 50 psig supply change Flow Capacity (Cv) Defined by the "1663" configuration. Environmental Ambient Temperature -40°F to 175°F (-40°C to 80°C) Enclosure Rating Type 4X, 6 (IP66/67) Hazardous Area Certifications FM/CSA & ATEX/IECEx: Explosion-proof & Intrinsically Safe