Products
Products
ABB Allen-Bradley ADEPT ALSTOM
All Categories
AMAT B&R BACHMANN BENTLY Bosch Rexroth BAILEY CUTLER-HAMMER DEIF DANAHER Enterasys Extreme EATON ELAU EMERSON EPRO FANUC servo motor FOXBORO GE HIMA Honeywell ICSTriplex IFM Kollmorgen SIEMENS Schneider WOODWARD YASKAWA Omron YOKOGAWA MOOG MOTOROLA NI RELIANCE Rexroth SEW-EURODRIVE TRICONEX Weidmueller Mitsubishi SICK FISHER
home
abb
SH204-D16
The ABB S204‑D16 miniature circuit breaker is a 4‑pole compact overcurrent protection device designed for use in low‑voltage AC electrical systems. It features a D‑type trip characteristic, making it suitable for circuits with high inrush currents such as motors and transformers. The breaker provides thermal and electromechanical protection against overloads and short circuits, and is DIN‑rail mountable for easy installation in distribution panels. Its robust construction and compliance with international standards make it suitable for residential, commercial, and light industrial applications.

More details >> Request a Quote >>
abb
SH204-D10
The ABB ST204M‑D10 (often referred to by catalogue type SH204‑D10) is a 4‑pole miniature circuit breaker (MCB) from ABB’s S‑200 / System Pro M Compact series, designed for low‑voltage electrical protection. It provides reliable overload and short‑circuit protection for distribution circuits in residential, commercial, and light industrial installations. This compact DIN‑rail mountable breaker uses a D‑type trip characteristic, offering good tolerance for high inrush currents such as those from motors or transformers while still offering responsive circuit protection

More details >> Request a Quote >>
abb
1SBL243001R8110
The ABB AL26‑30‑10 24 V DC Contactor (1SBL243001R8110) is a three‑pole DC‑operated power contactor designed for reliable control and switching of three‑phase electrical power circuits up to 690 V AC. It features three main normally‑open (NO) contacts and one built‑in auxiliary normally‑open contact for control signalling or interlock functions. The contactor uses a 24 V DC control coil with low power consumption, making it suitable for direct control by PLC outputs and DC control systems. Its compact block‑type design with screw terminals is ideal for installation in industrial and commercial control panels. It is suitable for motor control, lighting, capacitor switching, isolation, and general power loads

More details >> Request a Quote >>
abb
MS325-9 6.3-9A
The ABB MS325‑9 Manual Motor Starter is a three‑pole electromechanical protection device used for manual control (ON/OFF) and protection of electric motors and associated circuits. It combines manual switching with overload, short‑circuit, and phase‑failure protection without the need for external fuses. The device includes a rotary handle with clear position indication, a trip‑free mechanism, and built‑in disconnect functionality. It is suitable for both three‑phase and single‑phase applications and can accommodate add‑on accessories such as auxiliary contacts, signalling contacts, undervoltage releases, shunt trips, and locking devices.

More details >> Request a Quote >>
abb
1SDA051000R1
The ABB 1SDA051000R1 is a three‑pole molded case circuit breaker (MCCB) from the ABB TMAX T2S 160 series. It is designed for fixed installation with front terminals and features a thermo‑magnetic (TMD) trip unit with adjustable thermal and fixed magnetic settings. This breaker provides reliable overload and short‑circuit protection for low‑voltage electrical distribution systems, making it suitable for industrial, commercial, and panelboard applications where dependable circuit protection is required. The thermomagnetic design allows adjustable current settings from 63 A up to 630 A to match protective coordination needs.

More details >> Request a Quote >>
abb
AX12-30-10-84
The ABB AX12‑30‑10‑84 is a three‑pole general‑purpose AC contactor from the ABB AX series, designed for control and switching of three‑phase motors and power circuits. It features a 110 V AC coil (50 Hz) / 110–120 V AC coil (60 Hz) and a compact block‑type design with three normally open main contacts and one auxiliary contact for control signalling. This contactor is suitable for industrial and commercial applications including motor starters, lighting, and general power switching up to 690 V AC.

More details >> Request a Quote >>
abb
1SBL143001R8110
The ABB AL9‑30‑10 24 V DC Contactor (1SBL143001R8110) is a compact three‑pole DC‑operated power contactor designed for control and switching of three‑phase motors and general power circuits. It features three main normally‑open (NO) contacts and one built‑in auxiliary normally‑open contact for control signalling or interlock functions. The contactor uses a 24 V DC control coil with low power consumption, enabling direct operation from DC control systems or PLC outputs. It is suitable for industrial and commercial usage across a wide range of applications where reliable contact switching is required.

More details >> Request a Quote >>
abb
1SBL143001R8810
The ABB AL9‑30‑10 220 V DC Contactor (1SBL143001R8810) is a three‑pole DC‑operated power contactor designed for control and switching of three‑phase power circuits in industrial and commercial applications. It features three normally‑open main contacts and one normally‑open auxiliary contact for control signalling or interlock functions. The contactor is equipped with a 220 V DC coil and is suitable for switching motors, lighting, and general power loads up to 690 V AC. Its compact block‑type design with screw terminals enables easy installation in control panels and automation systems.

More details >> Request a Quote >>
abb
1SDA068057R1
The ABB 1SDA068057R1 is a three‑pole molded case circuit breaker (MCCB) from the ABB SACE Tmax XT3N series. It features a thermo‑magnetic (TMD) trip unit with an adjustable current setting range from 160 A up to 1600 A for reliable overload and short‑circuit protection in low‑voltage AC/DC power distribution systems. Designed for fixed installation with front bolt terminals, this breaker offers robust performance, high interrupting capability, and dependable protection for industrial and commercial electrical installations.

More details >> Request a Quote >>
abb
1SDA067032R1
The ABB 1SDA067032R1 is a four‑pole molded case circuit breaker (MCCB) from ABB’s Tmax XT2N series, featuring a thermomagnetic (TMD) trip unit with adjustable current settings from 20 A to 300 A. It is designed for fixed installation with front bolt terminal connections and provides reliable overload and short‑circuit protection for low‑voltage electrical distribution systems. This MCCB is suitable for applications in industrial and commercial power distribution where dependable protective coordination and robust interruption performance are required

More details >> Request a Quote >>
1 2
···
704 705 706 707 708 709 710
···
5680 5681
Related products
3RT20181BB42
CONTACTOR S00 16A 24VDC 1NC SCRW
HONEYWELL MC-YAMR03 51309218-175 Input Processor - Industrial Control Module -

The Honeywell MC-YAMR03 51309218-175 Input Processor is an advanced analog multiplexer designed for industrial control systems. It efficiently combines multiple low-level analog signals into a single channel, optimizing data transmission and reducing the complexity of system wiring.
MTL7761PAC
Parameter Specification Product Model MTL7761PAC Product Line Eaton MTL Signal Conditioners & Isolators Function Dual-channel, 2-Wire Transmitter Isolator & Power Supply Input Signal Accepts and powers two independent 2-wire, 4-20 mA transmitters. Output Signal Two independent, isolated 4-20 mA DC signals. Input/Output Isolation Galvanic Isolation between input, output, and power supply. Power Supply AC Input (e.g., 100-240V AC, specific range MUST be verified from datasheet). Connection Plug-in terminal blocks (inferred from "P") for easy wiring and maintenance. Intrinsic Safety (IS) Approval Yes. Certified for use in Hazardous Areas (e.g., ATEX, IECEx). Entity Parameters (MUST be verified for design): - Vmax (Ui): e.g., 28 V - Imax (Ii): e.g., 93 mA - Pi: e.g., 0.65 W - Ci: e.g., 0 μF - Li: e.g., 0 mH Non-Incendive (NI) Approval Yes (for applicable standards like FM/CSA). Line Fault Detection Yes. Accuracy Typically better than ±0.1% of span. Mounting DIN-Rail Mount (35 mm) Operating Temperature -20°C to +60°C